jasonmet77 Posted May 28, 2015 Report Share Posted May 28, 2015 Anyone know if this will work? I originally ordered +40mm TSW Donington's, but now I am rethinking it quickly before it's too late to find something like it in a +30. I believe factory 20's are +35? Thanks in advance Quote Link to comment Share on other sites More sharing options...
can0n4 Posted May 29, 2015 Report Share Posted May 29, 2015 (edited) need to know the wheel width. If they are 20x8.5 then the inner wheel will stick in 17.7mm closer to the suspension. The outside of the wheel will stick out 7.7mm further than the originals. Probably be ok, but might be tight on the inside. Edited May 29, 2015 by can0n4 Quote Link to comment Share on other sites More sharing options...
autom8r Posted May 29, 2015 Report Share Posted May 29, 2015 Seems like it. Either +30 or +40 will work. The 40's will be 0.5 cm closer to the strut. go to http://www.willtheyfit.com/index.php?width=265&aspect=45&diameter=20&wheelwidth=9&offset=30&width2=265&aspect2=50&diameter2=20&wheelwidth2=9&offset2=40#content Great site to analyze tire and wheel selections. 1 Quote Link to comment Share on other sites More sharing options...
jasonmet77 Posted May 29, 2015 Author Report Share Posted May 29, 2015 They are 20x8.5 +40. Worried about the strut. It's really close to the top corner of the 18" factory wheels I have now. Thanks for the link. I've looked at that one before. What is the offset of the factory wheels? That makes it hard to guess the differences. I've seen some sites say +35 and some say +38. Quote Link to comment Share on other sites More sharing options...
jasonmet77 Posted June 2, 2015 Author Report Share Posted June 2, 2015 Went with the 265/50r20 and they fit great. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.