Jump to content

Climate Control Blend Door 2010 Limited


Recommended Posts

I have read most if not all the threads about the various blend door issues.

 

In the last couple of days i have noticed a change in the amount of cold air I am getting out of the drivers side vents and being in Houston this is not a good time of year to lose your A/C.

 

I ran the test mode and it did not throw any codes, I also unplugged the blend door actuator and ran the test mode again just to make sure it was working and it threw a code.

 

I know the blend door works I get heat when I turn the temp up to 90 and I watch the lever move. Does that mean the blend door is fine or are there small adjustments it makes before it goes to full heat?

 

The passenger side blows cold air just fine and I have also noticed when i turn the fan speed down I get some cold air blowing out of the vent and no that is not going to be an adequate fix.

 

Thanks,

 

Andy

Link to comment
Share on other sites

  • 5 months later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...