Jump to content

2010 Edge cold air on passenger side


RogerL

Recommended Posts

So, I've reviewed several threads regarding the blend door actuator being the cause of not receiving hot air on the passenger side. I went out and purchased a replacement actuator only to find that this doesn't seem to be the problem. Am I looking at replacing the HVAC module at this point or is there something else I should be looking at? I disconnected the blend door linkage from the actuator and am able to get hot air out the passenger side now by manually adjusting the blend door, so it's not an issue with the heater core.

 

Thanks in advance for any assistance.

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...