2oldandslow Posted November 24, 2016 Report Share Posted November 24, 2016 I have a 2013 Edge SEL with dual climate control. I also didn't have any heat on the drivers side. Took to the dealer and they found trouble code B11E5 in the HVAC module. Ford has a SSM, Special Service Message 45784 which says to update HVAC. They did and its is now working. Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted November 25, 2016 Report Share Posted November 25, 2016 make it stay fixed! Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted November 25, 2016 Report Share Posted November 25, 2016 SSM 45784 - 2012-2014 Edge/MKX - Climate Control Stuck On Hot Or Cold Temperature Setting -With or Without DTCs B1082, B1083, B1086, B11E5, B11E6, And/or B11E7 Some 2012-2014 Edge/MKX vehicles may exhibit a condition where the climate control temperature is stuck in the full hot or full cold position. Diagnostic trouble codes (DTCs) B1081, B1082, B1083, B1086, B11E5, B11E6, and/or B11E7 may or may not be present in the heating ventilation air conditioning (HVAC) module. Program the HVAC module to the latest level calibration using IDS version 100.01 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 19980 and applicable laboroperation(s) in the Service Labor Time Standards (SLTS) Manual, Section 10. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.