rixbrix Posted May 18, 2017 Report Share Posted May 18, 2017 (edited) How and why use a wetting solution Edited May 18, 2017 by rixbrix Quote Link to comment Share on other sites More sharing options...
akirby Posted May 19, 2017 Report Share Posted May 19, 2017 Huh? Quote Link to comment Share on other sites More sharing options...
rwf78155 Posted May 19, 2017 Report Share Posted May 19, 2017 wtf? Quote Link to comment Share on other sites More sharing options...
IWRBB Posted May 19, 2017 Report Share Posted May 19, 2017 I think the question is how to and why should you use a wetting solution to install a rear bumper protector. My answer to that would be so you don't screw up and have it permanently stuck in the wrong position. The fluid lets you move it around some, then when you are happy with the position, you press out the fluid starting from the center working you way out. Quote Link to comment Share on other sites More sharing options...
chefduane Posted May 19, 2017 Report Share Posted May 19, 2017 (edited) I stuck one of the bumper protectors on without wetting the suface. You just need to be careful and take your time about placing it. The wetting solution allows you to move it around a bit (as IWRBB suggested) before squeegeeing out the water. Nice bumper protector and looks great, but definitely NOT worth the $$ I paid for it. It might be ok at half the price. Edited May 19, 2017 by chefduane 1 Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted May 19, 2017 Report Share Posted May 19, 2017 You might find the following YouTube video on installing a bumper protector useful: 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.