Jump to content

2015 Ford Edge Engine issues


Kenawo

Recommended Posts

Hi People

 

I bought a salvaged 2015 ford edge(13,288 miles, 2.0L ) with front damage. To fix it, had to buy another short block and change the cylinder head cos they were both damaged from overheating after the accident. After the replacements were installed, i noticed that the car picks up slowly an in addition once the car approaches 62 mph(100 kmh) it wont accelerate any further. After letting go a little and pressing harder, it gets to 74 mph(120kmh) and appears to be stuck at that speed. Has anyone experienced this or would anyone be able to provide potential solutions?

 

My avg fuel assumption is 10.2mpg for driving within the city.

 

thanks

Link to comment
Share on other sites

Could be a MyKey type issue, or a loose hose somewhere in the turbo piping tract. Ford does not clamp all the turbo hoses (the small ones in particular). Even if they are clamped, they can come loose or actually split on the underside. If you reused the throttle body and sensors, might need a new throttle body/motor and/or throttle position sensor. Check exhaust for leaks, and cats for being plugged.

Link to comment
Share on other sites

Update

 

I drove in SPORT mode yesterday and the car drove normally and picked up speed as expected. However,when i shifted back to DRIVE, it went back to status quo. Slow pickup and stalling at 100km/h..Anyone experienced such or able to offer advice. Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...