Jump to content

Custom horn wiring


Recommended Posts

  • 2 weeks later...

I don't know how to connect this to the stock wiring harness

 

You will either have to splice it in right down where the horns are (which means maybe running an extension line from your horn harness), or try and trace those wires back to a point where they are close enough to tap into. Wires will be cut or exposed to make any option happen.

 

Another, more involved option is to visit your local Pik-n-Pull to see if you can find another Edge with the same stock horns. Take the pigtail off that and tie your horn harness into that. They should give you the extra wire length to make thing simpler to solder and if the new horns are not your thing, you can easily replace the original stock horns.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...