colorado Posted April 3, 2018 Report Share Posted April 3, 2018 notice there some topic for that but nothing works so far, started with those coming on and then the abs and traction would go off and on. after restarting the car, all light would be gone and after come back. but now its always there. transmission got power and shifting ok, no difference notice. did check all my abs sensor with a multi meter(3 were around 1.41 to 1.47 and the other one was at 2.1), don't know if it could be a problem. also check all my tone ring, no damage found. like i said the car run fine. what would be my next options. thanks for any help. Quote Link to comment Share on other sites More sharing options...
akirby Posted April 3, 2018 Report Share Posted April 3, 2018 Read the codes and stop guessing. Could still be a bad sensor/loose sensor wire. 1 Quote Link to comment Share on other sites More sharing options...
colorado Posted April 3, 2018 Author Report Share Posted April 3, 2018 to read those code, you probably need to go to the dealer, cause my odb2 is not reading anything. Quote Link to comment Share on other sites More sharing options...
omar302 Posted April 3, 2018 Report Share Posted April 3, 2018 ForScan enables you to read all/most DTCs from all/most modules in Ford vehicles. 1 Quote Link to comment Share on other sites More sharing options...
colorado Posted April 3, 2018 Author Report Share Posted April 3, 2018 ok, will try it, thanks Quote Link to comment Share on other sites More sharing options...
macbwt Posted April 4, 2018 Report Share Posted April 4, 2018 A dirty or bad MAF sensor will toss out those codes. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.