Jump to content

Intercooler Outlet/Cold Pipe Upgrade (2015-2018 Edge Sport)


Special_K

Recommended Posts

4 hours ago, tyyrael said:

 

Nice!!!  You get any kind of noticeable benefit? I'm sure the IAT's are lower and maybe even hear some sound differences through that metal piping. I might be interested in doing this sometime soon

 

Well, I installed it with a UP FMIC, and only took it out real quick to try and blow the charge pipes on the highway. Im too lazy to build and run a boost leak tester for the twin setup.

 

Immediately noticed better throttle response. Charge pipes held, boosting mid 22 psi iirc on a 93 unleashed tune using a BDX device. I am not on an updated tune for the fmic and charge pipe yet. Going to re-tune when im done installing the water meth.

 

Overall, there is jack shit for aftermarket with this platform. So if you want gains there is a pretty well laid out stategy with not many variables. This cold side pipe is definitely an upgrade in the fliw department, but should be coupled with an aftermarket fmic for better overall performance. Mixing it with a bigger throttle body would help too, but for the 500 bucks BBK wants you could just run water meth.

 

Being a direct injected ecoboost motor, there is carbon fouling on the intake valves that leads to issues. Wmi cleans them nicely. The other option is walnut blasting/manual scrubbing. So running water methanol injection helps all over the place. Which the Ram Fab has an option for a meth bung. Wins all way round.

  • Like 3
Link to comment
Share on other sites

  • 1 year later...

Happy Good Friday Guys and Gals,

 

Quick heads up in regards to the FMIC  cold pipe upgrade!  RamFab is no longer making the cold pipe upgrade. he has passed on the tools and materials necessary to DTP Fab!

 

DTB Fab can be reached via the following:

 

https://dtpfabworks.com/ or https://www.instagram.com/dtp_fabworks/?hl=en

 

Hope this clears up some confusion!

  • Thanks 2
Link to comment
Share on other sites

  • 1 month later...
  • 2 months later...
On 4/15/2022 at 8:21 AM, onyxbfly said:

Happy Good Friday Guys and Gals,

 

Quick heads up in regards to the FMIC  cold pipe upgrade!  RamFab is no longer making the cold pipe upgrade. he has passed on the tools and materials necessary to DTP Fab!

 

DTB Fab can be reached via the following:

 

https://dtpfabworks.com/ or https://www.instagram.com/dtp_fabworks/?hl=en

 

Hope this clears up some confusion!

I noticed that in the 2.7EB  Ultimate Parts Thread that RamFab is stll listed as the source of the cold side pipe. 

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...
On 8/6/2022 at 3:59 PM, Xtra said:

I noticed that in the 2.7EB  Ultimate Parts Thread that RamFab is stll listed as the source of the cold side pipe. 

 

My information comes directly from Colin and Jim. If you take a gander at the Ultimate Parts thread you will see that it hasn't been updated in quite some time. @Special_K or @snmjim would have to edit it, or have a mod do it.

 

Or if someone is so inclined to check to see if they can order one from RamFab.

Link to comment
Share on other sites

3 hours ago, onyxbfly said:

 

My information comes directly from Colin and Jim. If you take a gander at the Ultimate Parts thread you will see that it hasn't been updated in quite some time. @Special_K or @snmjim would have to edit it, or have a mod do it.

 

Or if someone is so inclined to check to see if they can order one from RamFab.

 

Ramfab will point you in the right direction as to who he sold the rights to...?

  • Like 1
Link to comment
Share on other sites

4 hours ago, Cerberus said:

FWIW, I sent them (DTP Fab) a msg through their site form, asking for a quote for the cold pipe with meth bung, cerakoted, and never heard back from them

 

SMDH!! Not that it helps, but their Instagram is fairly active. Their most recent post was of yesterday. Drop them a line via IG.

  • Like 1
Link to comment
Share on other sites

14 hours ago, Cerberus said:

I know you're going think I'm a dinosaur for saying this, but I don't do IG..

i guess i know what I have to do lol

 

Nah not at all, I'm not a big fan of social media.  Although, I do understand and respect those that do. I just don't feel the need to put my life on display.

  • Like 2
  • Haha 1
Link to comment
Share on other sites

  • 5 months later...
On 9/7/2022 at 8:48 AM, onyxbfly said:

 

Nah not at all, I'm not a big fan of social media.  Although, I do understand and respect those that do. I just don't feel the need to put my life on display.

finally got on IG.. just to track down performance specialists like Jim and DTP fab ..

summer is coming, time to make it faster :)

 

Link to comment
Share on other sites

  • 10 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...