Jump to content

2015 Edge Sport Code P0344


axeman_87

Recommended Posts

Hey had this car for two years now. no issues. about 6 months ago this code came up. i cleared it and now it came back again, but only stayed on for half the day, this one cleared too. should i be worried or anything to check out?

 

P0344 FORD - Camshaft Position Sensor 'A' Circuit Intermittent Bank 1 or Single Sensor

Link to comment
Share on other sites

Not sure which exact sensor on Bank 1 this code refers to, but probably the intake since it is the "A" sensor? Bank 1 is referred to as LH (lefthand), Bank2 is referred to as RH (righthand).

 

Basically you have to remove the appearance cover to get to these sensors. (For the sensors on Bank 2 you would in addition need to remove the air cleaner outlet and CAC pipe on that side, a bit more involved.) The intake and exhaust sensors are right next to each other.

 

LH (left­hand) Camshaft Position (CMP) Sensors

Remove the nut next to the oil fill cap. Torque: 42 lb.in (4.8 Nm) Remove the bolt at the rear of the appearance cover (next to firewall) and remove the engine appearance cover. Torque: 93 lb.in (10.5 Nm)

2015 Edge R&R LH Camshaft Position Sensors

Remember to oil the sensor O-Rings before reinstalling. 5W30 engine oil.

 

https://parts.ford.com/shop/en/us/sensorsdevices/sensor-camshaft-position-7871083-1

Edited by WWWPerfA_ZN0W
Link to comment
Share on other sites

  • 7 months later...
  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...