Jump to content

2010 Limited. 1071 OBD code-Bank 1 lean


Bob Onit

Recommended Posts

Hi all. My check engine light came on about 10 days ago on my 2010 Limited. Code was 1071 which indicates Bank 1 lean.

From the research I've done the 1071 usually goes hand in hand with the 1074 (Bank 2 lean) which is often a vacuum leak so I'm kind of scratching my head here why only Bank 1 is lean. I cleared the code and it hasn't come up again but the fuel mileage is suffering a little..

 

I'd be very grateful to the forum members with any information or experience with this issue.. $100 per hour adds up quick.

Thanks.

Bob.

Link to comment
Share on other sites

Bob, either too little fuel or too much air. I am sure there are more possible causes, but here you go...

 

Too little fuel: problem with fuel pump, fuel filter

 

Too much air: leaks in the air intake tubing, vacuum lines, clips not fastened in air cleaner box, dipstick not pushed all the way in, PCV valve stuck open

 

P0171 is the correct code BTW.

Link to comment
Share on other sites

Wow! Thanks for all the reply's. I dont have much on service records but the top end is super clean so I'd guess it had regular oil changes. Just turned 91,k miles.

I have a pit in my garage so I'll change the fuel filter (I''m guessing it's on one of the frame rails) and I'll also do whatever else I can do before I have to take it in for the professionals.

Thanks very much for the reply's.

Bob.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...