Search the Community
Showing results for tags 'vacuum'.
Found 4 results
Help! [2017 2.0L] Remove brake booster hose @ manifold
terrajon posted a topic in Brakes, Chassis & SuspensionI'm trying to remove the intake manifold to access the fuel injectors on my 2017 2.0L Ecoboost. (the next step in my quest to diagnose a repeated cylinder #2 misfire). The brake booster hose runs into the right side of the manifold & seems to require a special tool for removal, or at least I think so. The coupler is red, round and smooth (there's no clips). Does anyone have experience with this hose/coupler and what it takes to remove it? I've searched this forum and the internet and can't seem to find any mention of it. thanks!
2011 Edge SEL - Rough Idle
cmhhawaii posted a topic in 3.5LI have been having an issue with my 2011 Edge running rough at idle. The edge has 77,000 miles. Here's the story: I was having trouble with a cylinder misfire under normal driving. The code read "misfire cylinder 5". I took it into the dealer. They told me I had a bad coil on cylinder 2. They would replace it for $800, but recommended replacing all of them for $2,500. I passed on their offer and performed the repair myself. I found a cracked insulator on the spark plug at cylinder 5. I replaced all of the coils and spark plugs anyways - for good measure. The misfiring cylinder was solved. Since I was under the hood and had the intake off, I took the opportunity to swap out my air filter and clean the mass airflow sensor. I bought a nice K&N air filter and installed it and cleaned the mass airflow sensor with CRC mass airflow sensor cleaner. After driving around for a while, I got a check engine light with fuel/air codes. I figured this was due to the increased airflow from the new high-performance filter. I swapped it out for a normal paper filter. The engine codes went away. Well, it seems these things come in threes: The following few weeks, the engine started running very rough at idle. I suspected a vacuum leak somewhere. I removed the intake manifold, to see if I had damaged a gasket , or forgot to connect a line. Everything looked good. Then, I checked the Emissions Vapor Canister Purge Valve and it does not appear to be malfunctioning. All the lines on the intake side appear to be seated correctly. Does anyone have any suggestions on where to look next? -Thank you in advance
13N02 - Extended Warranty Coverage on Brake Booster
omar302 posted a topic in Recalls, TSBs & WarrantyCan someone provide more details on a "13N01" Field Service Action? Preferably a PDF copy?
vacuum leak sound
roylg posted a topic in 2007 Edge & MKXMy wife's 2007 Edge has within the week developed a hiss or vacuum leak sound from the engine area. We hear it on the freeway with slight acceleration. Also the trans sometimes shifts erratically, ie lurching.? Any ideas?