Search the Community
Showing results for tags 'hitch'.
Found 8 results
-
Adding OEM hitch 2016 Ford Edge Sport
mr_jason posted a topic in Cargo, Hauling, Roof Racks & Towing
Over the weekend I decided to take a chance and add the oem ford hitch to my 2016 Edge sport. This meant cutting a hole in the bumper, swapping the foot sensors with the split sensors and adding the 4 pin trailer lighting. I had the draw Tite hitch and decided I didnt want to remove the heat shield bumper support or have it hang down. The only down side was fabricating the lower foot sensor mount, it wasnt a direct replacement. If you decide to do this Im not responsible for anything you do to your car. -
Front end hitch receiver compatible with 2008?
WooK posted a topic in Cargo, Hauling, Roof Racks & Towing
Hey everyone. I'm interested in putting a hitch receiver on the front end of my 2008 Ford Edge, so that I can put a tire carrier on the front. I have found just one receiver assembly while searching online. It is the Curt 31050 front end hitch. Everywhere selling it has it listed as compatible for the 2011-2013. I'm wondering if I still might be able to fit it to my 2008 edge. Here is the manufacturers product page. Thanks for your help! -
OEM Hitch Installation w/ photos & foot activated lift gate works.
marksandbothe posted a topic in Cargo, Hauling, Roof Racks & Towing
I've looked at a lot of photos in this forum in trying to decide which hitch to install. I ended paying a little more (a lot more!) and getting the factory hitch installed. I'm 100% happy that I did. They really did a fantastic job. They had to cut the rear bumper cover and it while it could be straighter, I'm sure it's something I'll never notice. Plus, If I decide to get the wiring harness there's a place to mount that. I purchased this used so I had a hard time finding one with a trailer hitch. Plus, I didn't the whole towing package. This is mainly for bikes/cargo carrier/jet ski occasionally. I can also report that the foot activated lift gate works if you kick to the right of the hitch. Super happy. Thanks for everyone that posted photos. -
Using a Weight Distribution Hitch on a 2012 Edge Factory Tow Setup
amurfey posted a topic in Cargo, Hauling, Roof Racks & Towing
I have a 2012 Ford Edge Ltd with the factory tow package. I'm planning on towing a 3500 lb Airstream, twin axle travel trailer. I just purchased and will be installing a Tekonsha brake controller. My question is regarding using weight distribution bars on this hitch. Is anyone doing this, and if so what has your experience been like? thanks -
Hello, I hope I can get some clarifacation here. I bought a used 2013 Limited AWD in December from Hertz, no tow package installed and there was no option to add it either. and I can't figure out how to get a tow package at a reasonable cost. Google search only gives me two bits of info: Ford.com says that the tow package is option 53G which includes a radiator, radiator fan, trailer sway control, hitch and wiring- no pricing available I also found a single post from this site dated 2012, it doesn't really apply anymore as the info is a bit old and pre-2013; in this discussion was the availability of the tow package at $350 -reasonable! My ford dealer has the hitch only for $250, add a wiring for $75 and it does not include the other items from the 53G option. Since the Edge has the 4 trim packages, does anyone know if the Limited will already include an upgraded radiator over the base model despite not having a tow package? I am having a hard time finding out what is included in the base vs SEL vs Limited vs Sport; I'm sure that the upgrades are not simply aethetics yah know? I tried to compare the 2014 models starting from the base trim, a "tow option" is not available. You have to go up two trim levels to get the option. But the only difference that is shown is the added "advanced traction control option." Looking at ordering each part individually, I'm already up $1000 which seems really excessive to me. Thanks!
-
I am tring to decide between an after market hitch and the OEM bumper replacement one from Ford. The after market ones are about 13" to the top of the reciever. Can someone tell me the height of the OEM hitch?
-
From the album: Norm's Edge
2007 Edge + 1999 Bonair hybrid travel trailer -
HiddenHitch #87433 & Wiring Harness for 2007-2010 Edge and MKX
Franklee posted a topic in Classifieds
Our lease is up at the end of April. I have Hidden Hitch #87433 and the wiring harness/converter for 2007-2010 Edge and MKX No drill / No cut installation. All installation instructions and hardware included. http://www.hiddenhitch.com/content/products.aspx?lvl=3&parentid=0&catID=1040&part=87433 $100. S.E. Michigan pickup only