Search the Community
Showing results for tags 'keypad'.
Found 3 results
Please help, anyone experience this?
AlbertaEdge posted a topic in Alarms, Keyless Entry, Locks & Remote StartHi guys recently got a 2013 edge limited with 60,000km. When you manual start (push start) the HVAC blower blows on full blast and the sync screen is black meanwhile on the right gauge cluster display it says "temporarily lost connection with touch screen". One you hit the power button on the stereo the screen turns on and everything works as normal. When you remote start the vehicle the screen stays black, no HVAC at all, no heated seats, nothing. And yes in the instrument panel all remote settings are set to auto and it is -20°C here. Also noticed when you open the car door when it is off the sync screen doesn't like off. It's like it's not getting a power signal without manually turning it on. Also not sure if this affects anything but the door keypad also doesn't work, I think the 7/8 button is stuck in as all keys are unresponsive and don't light up the keypad except for the 9/0 key which by pressing it, it will lock the doors without even hitting the 7/8 key. I've been trying to use forscan to figure out the issue but I only find f150 or super duty forscan pages. Only DTC on forscan is on the HVAC Module and says lost connection with BCM. Any suggestions?
Factory Access Code Incorrect on the Owner's Card
Jay-Ar Linsangan posted a topic in Alarms, Keyless Entry, Locks & Remote StartAnyone else had this issue? Tried using the factory access code indicated on the card and it didn't work so I brought my 15 Edge Titanium to the dealer for service. At first they thought that the keypad has a hardware issue but after the service, they found out that the code indicated on the card doesn't match the specific factory access code for my Edge and they've just given me the correct code on the Service Report. Just sounds fishy to me.
dolphinsc66 posted a topic in Alarms, Keyless Entry, Locks & Remote StartAfter purchasing a 2010 Ford Edge Limited just a few weeks ago, I noticed only two lights (essentially 4 numbers) light up. Our 1999 Ford Explorer Limited had the keypad and all keypad lights lit up. Could this be a bad fuse or a few bad fuses...something I can fix myself or shall I take it to the dealer for a warranty issue since it's under the 3 years and 26,000 miles? Also, is there a function on these new keypads to open the hatch?