Jump to content
Texasopa

2013 EDGE CENTER CONSOLE TRAY

Recommended Posts

OK, I know there is a long thread about the 2011 Center Console tray missing. I took delivery of a 2013 Edge Limited on Tuesday, and it had a shelf.

The other thread was getting a little lengthy so I thought I would start a new one.I know several people want/need one of these trays, so I had to get some accessories installed

at the dealer today, so I took the tray into the parts dept. Parts man had tray in hand and still couldn't find it.

So I came home and tried again, and I found it. (I think)

Go to http://www.fordparts.com/

In the middle click shop by model

enter 2013 ford edge

Then search catalog

on next page Category Body

then subcategory Console

An attribute window will open up Sub model limited engine 3.5

your looking for

Part Number: <04567A

Floor Console Trim Panel

Ford Series ; Black (Upper) $51.03

I tried to just copy link to that page, but with so many selections and picks you have to make it would'nt let you.

I did snip the final page with part and description circled. It is attached

Now I'm NOT POSITIVELY sure that is the part, but it sure looks like it to me. You can order right off that page.

I have a gallery that has pictures of my shelf, so you may want to compare the two before you order.

Hope this helps

post-23318-0-56560200-1342893676_thumb.jpg

Edited by Texasopa

Share this post


Link to post
Share on other sites

Thanks...I did see that the other day after you posted your pics but wasn't sure either and figured I would try a local dealer and see what their price is. I am guessing 51.03 is the list price so you should be able to do better.

  • Like 1

Share this post


Link to post
Share on other sites

I have a useless rubber L shaped piece that came with my 13 SEL. I assume it's some kind of tray for inside the armrest but it doesn't fit nicely anywwhere. It's part number 045G34C on the exploded parts view from Texasopa. Middle of the page, left side. Is this supposed to fit in somewhere?

Share this post


Link to post
Share on other sites

I have a useless rubber L shaped piece that came with my 13 SEL. I assume it's some kind of tray for inside the armrest but it doesn't fit nicely anywwhere. It's part number 045G34C on the exploded parts view from Texasopa. Middle of the page, left side. Is this supposed to fit in somewhere?

 

 

I believe that piece goes in the cubby behind the ac controls. I didn't notice it until my wife said something like hey there is another cubby hole back there...just above the power outlet on the passenger side.

Share this post


Link to post
Share on other sites

Is that the piece that goes under the console...that small pass thru area from the drivers to passengers side?

Share this post


Link to post
Share on other sites

The part number to order the tray is DT4Z-7806202-AA. It'll cost around $40-50. I ended up with one today, and I think I actually like the one that I made better.

Share this post


Link to post
Share on other sites

Yes, the tray is for the storage area behind the console. No wonder it didnt fit in the console. Duh!

Share this post


Link to post
Share on other sites

The part number to order the tray is DT4Z-7806202-AA. It'll cost around $40-50. I ended up with one today, and I think I actually like the one that I made better.

What don't you like about the OEM one...or what do you like about yours more?

Share this post


Link to post
Share on other sites

Because of the depression in the middle, the usable surface area is much smaller. My stuff has to sit on my other stuff, instead of next to each other.

Share this post


Link to post
Share on other sites

Makes sense...you probably lose at least 1/4" all the way around. Might have to go to the dealer to check one out since the wifes large sunglass case barely fits.

Share this post


Link to post
Share on other sites

More than that, actually, and don't forget the giant U-shaped part in the front.

Share this post


Link to post
Share on other sites

I thought maybe I was missing something when I first read this post. The shelf tray that is shown in the parts diagram was already in the 2013 Edge Limited I just purchased 7/13/2012, which had a build date in June. Perhaps the trays are missing from earlier build vehicles, or it's included with the Limited? I don't know, but am glad I don't have to buy one.

Share this post


Link to post
Share on other sites

Could someone take some pictures of the top of the tray that came with their 2013? Thanks!

Share this post


Link to post
Share on other sites

Look at the photos in the Photo Gallery, by Texasopa.

Share this post


Link to post
Share on other sites

Could someone take some pictures of the top of the tray that came with their 2013? Thanks!

 

Share this post


Link to post
Share on other sites

Wow, that's kind of nice I HATE the center console on my 2011 Limited. I hate that it does NOT have a tray. It has this stupid little coin holder thing that attaches to to little tiny pin tabs assuming you can get it lined up. I definitely want a regular tray like that one... not sure it is worth 50 bucks though. This started on the 2012? or 2013?

Share this post


Link to post
Share on other sites

It appears the 2013 model is the first one to include the tray. My 2012 didn't come with anything besides the coin holder.

Share this post


Link to post
Share on other sites

Which 13 do you have? My SEL didn't come with a tray. Only the coinholder. Maybe detail didn't put it back????

 

Anyone else with a Canadian 13 SEL that has a tray from factory?

Share this post


Link to post
Share on other sites

Yes, trays are missing from earlier build 2013's. Mine was an end of February build date limited and no tray. I am going to track one down.

Share this post


Link to post
Share on other sites

I'm not sure that's it though... mine was built in May and still has no tray. Very strange and frustrating... might try asking my dealer about it, maybe they'll throw one in (ya right ;))

Share this post


Link to post
Share on other sites

Hey guys, I just got my 2013 Edge and at first I thought it too was missing the try, then got to looking at it was wedged into the bottom of the console. You might want to double check to make sure it’s not actually there.

Share this post


Link to post
Share on other sites

Hi all. I've had my 2013 Edge Limited AWD for 2 weeks now and I'm really enjoying this vehicle. I saw this thread and thought I'd chime in, not sure if it will be of any help. My Edge came with the console tray, but it was clear that the prep guy didn't know what it was, since it was smushed all the way down to the bottom of the console, upside down. Underneath the tray was the L-shaped rubber liner for the console pass-through, took me a while to figure that one out.

 

Anyway, I pulled the tray out just now so I can provide the part number, which seems different from the numbers above. Mine is DT43-78044C82-AAW. Not sure if this means anything, but the part number is followed by the characters >PP-RG<>TE0< .

 

I also received the coin holder, which was also just kind of shoved loose into the console.

 

My Edge has a build date of August 28, 2012. Hope this helps.

Edited by edge1217

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×