ScottnSandy Report post Posted July 22, 2014 My Edge stopped blowing cold air. I purchased a bottle of A/C Pro Cold and attached the nozzle to the low end. The pressure was already in the gauge lines for ambient temp. I noticed the compressor was not on. It started for a moment and then shut off. The directions on the bottle state to empty half the bottle into the line if the compressor is not on, but it also says don't over pressurize, so I'm at a loss. Help. Share this post Link to post Share on other sites
ScottnSandy Report post Posted July 28, 2014 Turns out it's the cooling fan. I need to see about buying online and what it takes to replace. Dealership wants $1100. to fix. Share this post Link to post Share on other sites
thirdgenlxi Report post Posted July 28, 2014 And now you have the wrong amount of freon in the system too..... might as well have somebody evacuate and recharge it with the correct amount. It's easy to replace.... there's a thread somewhere not too far back about replacing the fan 1 Share this post Link to post Share on other sites
