Jump to content
Brian1973

2013 sport ground effects

Recommended Posts

I found a crack in my right side ground effect and was wondering how do you remove them. I'm assuming there is some body molding tape.

Share this post


Link to post
Share on other sites

No tape apparently, there are 4 screws in all, and some tabs underneath that need to be unclipped.

 

  1. Remove the rocker panel moulding front cap.
    • Remove the 2 screws.
    • Remove the front cap.
  2. NOTE: RH shown, LH similar.

    Remove the 2 screws from the rocker panel moulding inside the rear wheelhouse.
  3. Open the front and rear doors.
  4. Release the retainers on the bottom of the rocker panel moulding.
  5. Pull outward to release the rocker panel moulding from the body, starting from the front of the vehicle moving rearward.
  6. To install, reverse the removal procedure.

Share this post


Link to post
Share on other sites

How do I release the top. I took the 4 screws out and it feels like the top of the ground effect in the door jams are bolted on. I don't want to pull to hard.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×