Jump to content
dman97

How to Program a GOH-PCMINI remote

Recommended Posts

I bought my 2013 edge used and it only had 1 remote start fob (GOH-PCMINI).  I bought a second one off ebay but, I am having trouble getting it programmed.  I followed these instructions from the person who sold it to me.

Here are programming instructions for this remote:


METHOD #1
1. Turn the ignition key to the ON position.
2. Press and release the program push-button switch 3 times.
3. Immediately turn the ignition key OFF.
4. Hold the program push-button switch ON, then start the vehicle using the ignition key.
5. When the unit senses the tach signal, the parking lights will begin to flash.
6. Release the program push-button switch. The parking lights will turn on for 3 seconds to indicate that the tach signal is stored and the unit is now out of the program mode.

METHOD #2
1. Turn the ignition to the on position.
2. Press and release the programming switch 3 times.
3. Press and hold, for 3 seconds, the button of the transmitter you wish to add until the parking light flashes, indicating the transmitter has been learned.

 

I also tried the method in this video: www.youtube.com/watch?v=eQ7HNE8eceM&t=3s

Nothing happens, I get not flashing parking lights.  

 

Does anyone have advice on how to program my second fob?

 

Thanks.

 

Share this post


Link to post
Share on other sites
Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×