JCrew7384 Posted December 20, 2018 Report Share Posted December 20, 2018 Are there any good manuals, FAQs, or posts about how to use a FORScan device and what options I could feasibly change to my Edge ST? I saw somewhere about enabling a heated wheel button on the main screen, that is a great upgrade. What else? Quote Link to comment Share on other sites More sharing options...
vega Posted December 20, 2018 Report Share Posted December 20, 2018 Look at this thread about Forescan. 1 Quote Link to comment Share on other sites More sharing options...
JCrew7384 Posted December 20, 2018 Author Report Share Posted December 20, 2018 Thanks 1 Quote Link to comment Share on other sites More sharing options...
bobyellow Posted December 22, 2018 Report Share Posted December 22, 2018 (edited) On 12/20/2018 at 3:51 PM, JCrew7384 said: Are there any good manuals, FAQs, or posts about how to use a FORScan device and what options I could feasibly change to my Edge ST? I saw somewhere about enabling a heated wheel button on the main screen, that is a great upgrade. What else? FORScan - I had to request an alpha version. Version 2.3.18 did not fully function as it didn't allow IPC to be changed (2.3.19 allowed almost all modules to be accessed) Here are the ones that I've used. The 'x' means don't change. I'd recommend that you save your settings (or get your AsBuilt file from Ford). I used codes from Fusions and F-150s (SuperDuty codes, Fusion codes and F-150 codes). Heated Seat AND Heated Steering Wheel icons on home & climate screen APIM 7D0-01-01 xxxx xxxx x8xx (although, there is an option for just a checkbox for this one since this code also puts the seats icons. For some modules there is a graphical option with checkboxes) **Best one as I never have to actually turn off the heated steering wheel. Remains 'on' for every car start! Once off per engine cycle, you have to use the Sync button to toggle Off/On if you need additional time for heating. 5min has worked for me but I'm guessing in the middle of winter, I'll bump that to 10min. Timeouts for Heated Steering Wheel HSWM 714-01-01 Xxx xxxx xxxx Replace the X of the following: 1=Timeout disabled, 8=5 mins, 9=10 mins, A=12 mins, B=15 mins, C=18 mins, D=20 mins, E=25 mins, F=30 mins Door Close Double Horn Honk (Engine Running Without Keyfob Detected (PTS)): BCM 726-16-01 xxXx zz REVERSE DIP SIDE MIRRORS (REQUIRES MEMORY MIRRORS/SEATS IN VEHICLE) **There is a setup procedure that you have 'train' each side with memory buttons. Only ONE side can be dipped... IPC 720-02-01: xxxx 7xxx xx DDM and PDM 740/1-03-01 7000 xx 740/1-13-01 FCxx Key Fob Window Closure (only open via Fob is factory set). Some might already be set since we can enable/disable the Open feature via the console. No sunroof.... ? Nor rear windows since they don't have the one-touch up/down feature (you'll find codes for Fusions since there are one-touch for rear windows). IPC 720-02-01 7xxx xxxx xxx Global Window Open & Close BCM 726-30-01 x1x1 xxxx xxx Global Close/Open DDM 740-05-01 Cxxxx xx Global Open/Close Enable Driver Side PDM 741-05-01 Cxxxx xx Global Open/Close Enable Passenger Side Turn Signal Flash Count SCCM 724-01-01 xxxx x6xx xx Replace * with one of the following: 0=1 Flash OUC False 1=1 Flash OUC True 2=1 Flash OUC False 3=1 Flash OUC True 4=2 Flashes OUC False 5=2 Flashes OUC True 6=3 Flashes OUC False 7=3 Flashes OUC True 8=4 Flashes OUC False 9=4 Flashes OUC True A=5 Flashes OUC False B=5 Flashes OUC True C=6 Flashes OUC False D=6 Flashes OUC True E=7 Flashes OUC False F=7 Flashes OUC True On Until Cancelled (OUC) means manually moving the turn signal arm in opposite direction or manually cancelling the turn signal. Two flashes are added automatically when trailer is attached. Seat belts and other minor noise annoyances can be turned off too. Edited December 22, 2018 by bobyellow 1 Quote Link to comment Share on other sites More sharing options...
matt8686 Posted December 30, 2018 Report Share Posted December 30, 2018 hey bobyellow, i just got a '19 Edge ST. i am thinking of buying an ODB II adapter and getting ForScan to turn off Auto Stop/Start. have you tried this? this was the adapter i was thinking of purchasing: https://www.amazon.com/gp/product/B01F0GVBWY/ref=ask_ql_qh_dp_hza any help would be appreciated!! just starting to research all of this and it sounds like you have had good success with the new Edge. there isn't much info to specifically guarantee that everything will work with the '19 Edge since most threads reference fusions, F150s, etc. Thanks! Quote Link to comment Share on other sites More sharing options...
Fingernip Posted December 30, 2018 Report Share Posted December 30, 2018 45 minutes ago, matt8686 said: hey bobyellow, i just got a '19 Edge ST. i am thinking of buying an ODB II adapter and getting ForScan to turn off Auto Stop/Start. have you tried this? this was the adapter i was thinking of purchasing: https://www.amazon.com/gp/product/B01F0GVBWY/ref=ask_ql_qh_dp_hza any help would be appreciated!! just starting to research all of this and it sounds like you have had good success with the new Edge. there isn't much info to specifically guarantee that everything will work with the '19 Edge since most threads reference fusions, F150s, etc. Thanks! Can’t you just manually turn it off with the button on the console? I thought I also saw a left hand menu option. I haven’t tested mine yet to see if it defaults back on after the car has been restarted. Quote Link to comment Share on other sites More sharing options...
matt8686 Posted December 30, 2018 Report Share Posted December 30, 2018 yes, but it resets with each engine cycle. i've had the car for 2 days and am already annoyed the times i forget to push the button and it shuts off at a red light. Quote Link to comment Share on other sites More sharing options...
Fingernip Posted December 30, 2018 Report Share Posted December 30, 2018 8 minutes ago, matt8686 said: yes, but it resets with each engine cycle. i've had the car for 2 days and am already annoyed the times i forget to push the button and it shuts off at a red light. Ahh ok. I can see it getting annoying too. Right now I just anticipate the light going green and let off the brake early so it restarts. In traffic I just brake enough to stop and it won’t shut off. I’ll be watching for your solution in case it becomes too aggravating. Quote Link to comment Share on other sites More sharing options...
matt8686 Posted December 30, 2018 Report Share Posted December 30, 2018 i have read that keeping the vehicle in sport mode also eliminates the feature, but i'm not sure i'd like to drive in sport 100% of the time. the ForScan fix should work.. i am just trying to be cautious and get as much info as possible before manipulating my vehicle's software. i will update. Quote Link to comment Share on other sites More sharing options...
Fingernip Posted December 30, 2018 Report Share Posted December 30, 2018 (edited) 6 minutes ago, matt8686 said: i have read that keeping the vehicle in sport mode also eliminates the feature, but i'm not sure i'd like to drive in sport 100% of the time. the ForScan fix should work.. i am just trying to be cautious and get as much info as possible before manipulating my vehicle's software. i will update. Sport mode has the same problem as just deactivating start/stop with the button. It defaults back to non sport every time you turn off the car. Edited December 30, 2018 by Fingernip Quote Link to comment Share on other sites More sharing options...
matt8686 Posted December 30, 2018 Report Share Posted December 30, 2018 no, i mean that WHILE in sport mode, the Auto Stop/Start feature does not activate. just another way to bypass Auto Start/Stop while driving. i personally haven't tried it yet though. 1 Quote Link to comment Share on other sites More sharing options...
tk2fast Posted February 8, 2019 Report Share Posted February 8, 2019 We just got a 2019 Edge Titanium and love the car but that start stop has to permanently go. Both my wife and I hate the thing as we always forget to hit the kill switch!. Does anyone know the procedure to do that in Forscan for the 2019 Edge? Quote Link to comment Share on other sites More sharing options...
Fingernip Posted February 9, 2019 Report Share Posted February 9, 2019 The start/stop actually grew on me. At first it was very annoying but now I leaned when I don’t want it I just stop and hold the brakes with minimal pressure and it won’t shut off. Usually I let it shut off and I just release the brake before traffic is moving to prevent a delay. Quote Link to comment Share on other sites More sharing options...
tk2fast Posted February 13, 2019 Report Share Posted February 13, 2019 CONFIRMED: THIS WORKED FOR A 2019 EDGE TITANIUM WITH 301A PKG. Auto start stop disabled using: BdyCM module - 726-48-02 X1XX XXXX By changing the one to a zero >>> X0XX XXXX Additionally changed the turn signal 3 flash to a 5 flash using: SCCM module - 724-01-01 XXXX X7XX By changing the seven to a B >>> XXXX XBXX This is the adapter I used. Thanks to all that have helped with this. Hope this helps others... $30. for the adapter. OHP ELMconfig Forscan OBD2 Adapter with MS-Can & HS-Can Switch for Ford DIY Diagnostics on Windows - Link below https://www.amazon.com/gp/product/B01F0GVBWY/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 2 Quote Link to comment Share on other sites More sharing options...
Dsmtweaker Posted February 16, 2019 Report Share Posted February 16, 2019 Anyone know how to keep the drl led accents lights(ford signature lighting) on While using turn signal? Quote Link to comment Share on other sites More sharing options...
bobyellow Posted February 16, 2019 Report Share Posted February 16, 2019 7 hours ago, Dsmtweaker said: Anyone know how to keep the drl led accents lights(ford signature lighting) on While using turn signal? I don't see any specific directions for 'signature lighting'. There are some posts about trying to disable them (they had no luck there). If present, the setting would probably be in the BCM module (726). You'd need to find a listing of all the codes, then compare to your AsBuild listing to find address that aren't described/discovered. My AsBuild (401A) goes to 726-74-02 (F-150 goes to 726-74-02 see that page). Bothers me too but I only see it when there is a reflection from a car in front of me. Also called 'Winking'. Most vehicles do this. Quote Link to comment Share on other sites More sharing options...
tk2fast Posted February 17, 2019 Report Share Posted February 17, 2019 I agree it's odd that the DRL turns off when the turn signal is on. I know that most vehicles do it, but makes no sense why. Would like to change that too if the info becomes available. Looked at several spreadsheets with FORScan mods and can't pin it down. Quote Link to comment Share on other sites More sharing options...
omar302 Posted February 17, 2019 Report Share Posted February 17, 2019 1 hour ago, tk2fast said: I agree it's odd that the DRL turns off when the turn signal is on. I know that most vehicles do it, but makes no sense why. Would like to change that too if the info becomes available. Looked at several spreadsheets with FORScan mods and can't pin it down. I think there is a regulation dictating that in case the DRL is close to the turn signal it should turn off when the signal is on. Also, it can be changed in ForScan: 726-26-02 xxx* xxxx xxxx DRL Switchback w/Turn Signal: 0=disable, 1=enable 2 Quote Link to comment Share on other sites More sharing options...
jamie1073 Posted February 17, 2019 Report Share Posted February 17, 2019 1 hour ago, omar302 said: I think there is a regulation dictating that in case the DRL is close to the turn signal it should turn off when the signal is on. Also, it can be changed in ForScan: 726-26-02 xxx* xxxx xxxx DRL Switchback w/Turn Signal: 0=disable, 1=enable Yeah I just assume it turns the DRL off so people notice the signal being activated. You know for the stupid people to be able to realize you really are signalling. Quote Link to comment Share on other sites More sharing options...
tk2fast Posted February 17, 2019 Report Share Posted February 17, 2019 (edited) Thank you omar302, that worked on my 2019 Edge Titanium with 301pkg. UPDATE April 11; After first making the code change checked and signal was working without turning off DRL. Now checking again this is not so. Weird, not sure what happened but will investigate and post. Edited April 11, 2019 by tk2fast Quote Link to comment Share on other sites More sharing options...
omar302 Posted February 18, 2019 Report Share Posted February 18, 2019 8 hours ago, jamie1073 said: Yeah I just assume it turns the DRL off so people notice the signal being activated. You know for the stupid people to be able to realize you really are signalling. In some cars you really can't see the signals with their very bright DRLs. Where I live there are no strict regulations, and hence many of those vehicles that have the DRLs turn off in the state remain on here, also some with the "Audi style" sequential signal and in daytime it is really hard notice the front turn signals from a reasonable distance. 2 Quote Link to comment Share on other sites More sharing options...
tk2fast Posted February 18, 2019 Report Share Posted February 18, 2019 That all makes sense omar302. Some of the DRL's are very bright. On my new edge the turn signal LED is a long strip under the lights so it's quite easy to see with the DRL's on. Quote Link to comment Share on other sites More sharing options...
Dsmtweaker Posted June 5, 2019 Report Share Posted June 5, 2019 On 2/17/2019 at 1:03 PM, omar302 said: I think there is a regulation dictating that in case the DRL is close to the turn signal it should turn off when the signal is on. Also, it can be changed in ForScan: 726-26-02 xxx* xxxx xxxx DRL Switchback w/Turn Signal: 0=disable, 1=enable This worked, but the signature lights dim way down when the turn signal is on. Do you know if there is a setting so the signature lights keep their intensity? Quote Link to comment Share on other sites More sharing options...
omar302 Posted June 5, 2019 Report Share Posted June 5, 2019 35 minutes ago, Dsmtweaker said: This worked, but the signature lights dim way down when the turn signal is on. Do you know if there is a setting so the signature lights keep their intensity? What I posted is the only thing I know on this. Quote Link to comment Share on other sites More sharing options...
mvan231 Posted June 5, 2019 Report Share Posted June 5, 2019 It would be brilliant to generate some sort of manual including how-to setup, initial connections, CAN bus to use, etc. It would be a ton of work though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.