Kwok Posted July 31, 2020 Report Share Posted July 31, 2020 (edited) First of all, the most important point is to choose a wheel spacers with the brand's exclusive LOGO, and buy genuine products through normal channels. If they print their own brand LOGO on the wheel spacers body, bolts, and nuts, it means that the brand is very responsible and rigorous and confident in its products. There are many unbranded wheel spacers on the market. The words printed on their products are metric specifications or other non-brand name signs. In this way, buyers who have purchased three products will encounter potential risks, and the probability of sellers evading responsibility will be very high. Today I would like to share something about installing 25mm+30mm BONOSS Forged Active Cooling Wheel Spacers (Formerly BLOX-sport) for my Mustang sixth gen S550 with you. PCD: 5X114.3 CB: 70.5 wheel spacers thickness: front wheels+25mm rear wheels+30mm Tightening Torque: 140 NM minimum number of turns: 7.5 turns Before and after install wheel spacers. Next time I will share the tensile strength, yield strength, elongation of aluminum alloy. If you have any other comments, please leave a message, I will study hard. Thank you for your reading. Thank u very much~ Edited July 31, 2020 by Kwok Quote Link to comment Share on other sites More sharing options...
Kwok Posted July 31, 2020 Author Report Share Posted July 31, 2020 If you need to know a lot more installation information, you could watch my video on YouTube. Hope this video could you. Thank you. https://youtu.be/T7tTLYbgokc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.