guyina4x4 Report post Posted February 21 (edited) can't shut it off I go through the setup and select off but it goes right back to on. any other way to disable it? can it be disabled with forscan? thanks Edited Thursday at 06:45 PM by guyina4x4 Share this post Link to post Share on other sites
enigma-2 Report post Posted Wednesday at 05:17 AM Fuse #35 in the passenger compartment fuse box. (But it also disables the AWD & heated seats). Is it on all the time or just when you shift into reverse? I got rear-ended and knocked a sensor out of its socket. It was reading the inside of the bumper as an obstacle unlit I moved it back into its socket. Point is, if its on only when you backup, its probably one of the sensors that's failed. Easy enough to replace (or disconnect). Share this post Link to post Share on other sites
guyina4x4 Report post Posted Thursday at 02:47 PM just when backing up I pull a small trailer a lot and it's annoying I've had other Fords with this and been able to switch to off this one lets me select off but does not shut off and if I go back into the menu it's set to on again Share this post Link to post Share on other sites
enigma-2 Report post Posted Friday at 08:57 PM (edited) On 2/25/2021 at 9:47 AM, guyina4x4 said: just when backing up I pull a small trailer a lot and it's annoying OK, normal operation. Yes, you can turn it off. Put the vehicle in Reverse. Press and hold the TRIP/RESET for 2 seconds to turn the rear park assist OFF or ON. Edited Friday at 08:58 PM by enigma-2 Share this post Link to post Share on other sites
