Asovietsloth Report post Posted March 26, 2022 I have replaced the caliper, wheel bearing, rotor, brakes and the strut on the driver side. Its making a popping/creaking noise when turning. Does it going both left and right. I am honestly stumped. Any suggestions on what to try and what to look for? Share this post Link to post Share on other sites
kruzr1 Report post Posted March 27, 2022 have you looked at the strut mount or stabilizer link? Share this post Link to post Share on other sites
WWWPerfA_ZN0W Report post Posted March 27, 2022 if the noise exists when turning the wheel at idle while parked, then most likely it is the strut mount. strut mounts should generally be replaced with struts - motorcraft/ford brand is by far the best choice from user reports. definitely look at the links and the rest of the suspension bushings as suggested above. control arms, tie rod ends, are all possible suspects if mounts are ruled out. 1 Share this post Link to post Share on other sites
enigma-2 Report post Posted April 11, 2022 This is what a bad strut mount sounds like. (As WWWPerfa stated, change when changing struts). 1 Share this post Link to post Share on other sites
