Babytsunami Report post Posted December 11, 2022 Hi , I need rubber hose part number , the hose is like a letter "u" and connects the intake manifold to the vacuum hose connector part 65252tk , for a 2013 Ford edge se thanks Share this post Link to post Share on other sites
1004ron Report post Posted December 11, 2022 Is that the 2.0L engine? Please add your model and year to your profile signature - https://www.fordedgeforum.com/settings/signature/ Share this post Link to post Share on other sites
Babytsunami Report post Posted December 11, 2022 No . It's 3.5 V6 Share this post Link to post Share on other sites
Haz Report post Posted December 12, 2022 Molded hose is Ford part number: BT4Z-9C482-A Link to Ford's online parts site showing 9C482 Performing a web search of BT4Z-9C482-A may yield improved pricing via online sellers. Good luck! 2 Share this post Link to post Share on other sites
Babytsunami Report post Posted December 12, 2022 This is it . Thank you. 😵 😀 Thanks 👍 Share this post Link to post Share on other sites
DILLARD000 Report post Posted December 19, 2022 Vacuum from IntakeManifold for the Brakes, not a complicated part, just simple hose for air vacuum. Can use above FactoryOE FordMotorcraft part at a premium price, or a couple of feet of much less expensive stock 5/8"ID Vacuum\Heater\Fuel\Hydraulic Hose by the foot from any parts store. Personally don't have a problem telling stealerships to stuff their outrageous prices, when I get the chance. Share this post Link to post Share on other sites
Haz Report post Posted December 19, 2022 I once removed a faulty Rear Gate Trunk Module and replaced it with a 1960's-era transistor radio, but I had to remove it, because every time the Emergency Broadcast System was tested, the power liftgate would open. Good luck! Share this post Link to post Share on other sites