Jump to content

rl07edge

Edge Member
  • Posts

    12
  • Joined

  • Last visited

Posts posted by rl07edge

  1. Hi:

    Is any one know the exactly size for sel model? Is front door and rear door speaker same size? Can I use this (MTX Thunder Dome-Axial TDX6502 6 1/2" Speakers)?

    Mfr. Part Number: TDX 6502

    Converts to Components No

    Crossover Style Info Not Available

    Frequency Response 48hz-20khz

    Impedance 4 Ohms

    Impedance Rating 4

    Included In Box Manual

    Mid Range Size No

    Mid Range Style Info Not Available

    Mounting Depth 2 1/16"

    Power Handling 120 Watts

    Product Dimensions 22.0(W) x 10.5(H) x 42.0(D) cm

    Product Warranty 1 Year Parts & Labour

    Product Weight 2.9 kg

    Recommended Power Range 120 Watts

    Sensitivity 92Db

    Speaker Size 6 1/2"

    Speaker Type 2-Way

    Super Tweeter Style No

    Tweeter Protection Circuit Info Not Available

    Tweeter Size 25 mm

    Tweeter Style Soft Dome

    Woofer Material Not Applicable

    Woofer Surround Material Not Applicable

     

    More Information

    FEATURES:

     

    All models of the Thunder Dome-Axial line are designed to be installation friendly and have one of the shallowest mounting depths available.

     

    The graphite style grille sets off the aluminum deposition cone of the speaker giving the Thunder Dome-Axial speakers a look that demands attention to go along with their high performance standards.

     

    Thanks!

     

    The front and rear doors both take 6X8" speakers. The depth is different between the front and rear, the rear openings accept a shallower depth.

     

    Try this URL http://www.crutchfield.com/S-RMSnFtZemf9/c...ader*whatfits*_

  2. When I purchased my 2007 Ford Edge SEL it was from Dealer Stock so I did not have theoption of which radio to choose. After a few weeks I decided to put in a Factory Ford Navigation Radio rather than go the aftermarket route.

     

    I went on ebay and pruchased a unit which was from a 06/07 Explorer or Mountaineer, which has a Ford Part # 6L2T-18K931-BC. The Edge Ford Part #'s are 7T4T-18K931-BA and 7T4T-18K931-AG which are Premium or Audiophile units and would require no reprogramming to match the vehicle. I have seen one of these part #'s on an ebay auction. I am also attaching a PDF file that I used to help me with my radios search on ebay to make sure that I was getting the right plug configuration and mounting type.

     

    The radio did not come with an antenna, so that was my next search. First I had to find the part # which specifically for the Edge is 7T4Z-10E893-A, although 8G1Z-10E893-A will also work. I found the antenna on Amazon.com through Troy Ford by entering in the base part # 10E893 in the search window.

     

    The whole installation takes maybe 30 minutes and it is all plug and play. I will post pictures in the near future of the installation.

     

    The best part about it is that all the factory items cost me less than buying a Pioneer or Kenwood Nav Radio! I am also going to change out the factory speakers with Kenwood speakers front and rear.

     

    I hope this helps for anyone else looking to perform a similar upgrade to their Edge!

    radio_guide.pdf

    post-1516-1189883058_thumb.jpg

  3. The Ford part number is 10E893.

     

    You do realize where its located right? Its not on the roof or the spoiler!

     

    Its under the dash. Yup that nav unit has to come out again so you can istall the GPS ant.

     

    Richard and Barbie

     

    Thanks for quick reply! Yes I understand it is under the dash and need to remove the radio again, but it is only a 10 minute job.

×
×
  • Create New...