Jump to content

chrissnow

Edge Member
  • Posts

    19
  • Joined

  • Last visited

Posts posted by chrissnow

  1. You are making this harder than it needs to be. Just order the struts and strut bearing mount. Everything will work out. Never bought an insulator for any Edge just reuse and and it will be fine.

    ok thanks, i was just wanting to make sure I had everything I needed. I don't mind replacing it all while it's tore apart,

    • Like 1
  2. Haven't ordered yet, but do the motorcraft strut mount come with the upper insulator and does anyone have a source for the lower insulator? Everything I find online says upper insulator. I am thinking the kyb kit I found is just the mount and upper insulator. or is the upper insulator actually the lower that I need? Ford parts online doesn't even list anything in between the mount and spring but they do list the lower but none of the parts stores list them.

  3. There are only struts and strut bearing mounts. Buy the motorcraft strut bearing mounts. By the greaseable MOOG sway bar links. Forget everything else. They do not have bellows, or bump stops on struts. Never replaced a set of sway bar bushing yet, especially at your low mileage. You should buy rear shocks also.

    I noticed in an older post you were recommending moog strut mounts, why have you changed your mind? I am getting ready to install new shocks and struts and was thinking of going ahead and doing the mounts as well. Just making sure I get the best bang for my buck. Thanks

  4. Looking for info on radio upgrades for my wife's 07 edge no subwoofer. Mainly looking for feedback on good units with bluetooth phone and streaming music from phone. was also kicking around the idea of a future back up camera install if possible. I have looked on crutchfield site and best buy, just really looking for what other edge owners have installed and how they like it. Thanks again

  5. Ok thanks, I haven't called the dealer yet, I am kind of worried of the situation, there is no proof that it was or wasn't on before. I was going to switch the 2 o2 sensors from bank 1 and 2 to see if maybe the code would follow the sensor, but from your article it sounds like the o2 sensor is fine. I may call them tomorrow and see what they have to say, I mean this thing was running fine until the PCM issue. I imagine there scan tool should be able to check for injector flaws. The plugs, PCM and timing should be ok. that just leaves the converter or an intake leak (which would fall back on them). I'll keep the forum posted. thanks again

  6. Well the dealer called and they are checking in with Ford to see what all will be covered they said more than likely the PCM will be covered but they don't know if the ignition coils or spark plugs will be. Just have to wait and see.

  7. Bring this back up from the dead, My wife's 07 edge with 71000 miles is having the same issues, I went ahead and replaced the spark plugs and 2 cops but I am now having a bad cop code. It is currently at the local ford garage and I imagine I am going to have to eat this bill, the build date for the car is 9-13-07 so I should be under emissions warranty but everyone I have talked to at the dealer didn't seem to think it will cover it.

×
×
  • Create New...