guidoyanovich

I just ordered the front weathertech ones. I originally ordered the EGR ones for all windows a year or so ago and it seems the passenger side one shrunk??? All the others seem snug, ok for fit still.

I was driving home one day last summer with the windows down and hit a patch of bumpy road when the passenger side fell out.

Luckily I was in the curb lane and I saw it bounce off the road, do a couple of flips and land in someones front yard.

I turned around when I could and went back to get it.

Since then it has seemed loose in the channel and just last Wednesday as I lowered the window to clear condensation it just fell out as I came to a T intersection and part of the end had broken off.

I jumped out grabbed it, threw it in the back and put it back on at work

Later I told the wife...don't open your window...well this is unacceptable

So I'll see how the weathertech fronts go and update.

We call ours DREDGE

Last weekend I took it in for routine maintenance at 22K miles, oil change, tire rotation, also had an alignment done.

installed a new cabin air filter, the original was installed crooked and turned up on one side...dirty as sin...also installed led brake lights at the in-laws while Daytona was on a rain delay watching the race unfold now...34 laps remaining.

I'm looking at getting these bulbs to replace the Stop/tail/sidemarker lamp

4 bulbs, 3157K LCP or 3157K per the manual. I have a $70 gift card I need to spend

They are from Pepboys but they have can-bus built in.

 

Will these work on our 2013 Edge?

 

thanks all!

 

Pilot 3157 LED Bulb SMD 15 LED Amber 2 Piece

Part # IL3157A15 SKU: 867632

• Super bright 5050 SMD technology
• Long life: 50,000 hours of continuous use
• Instant styling upgrade
• Direct replacement for almost all factory applications
• No error messages: Built-in "CAN Bus" LED

Pilot 3157 LED Bulb SMD 15 LED Red 2 Piece

Part # IL3157R15 SKU: 867625

• Super bright 5050 SMD technology
• Long life: 50,000 hours of continuous use
• Instant styling upgrade
• Direct replacement for almost all factory applications
• No error messages: Built-in "CAN Bus" LED

That's a good idea Thanks normcloutier and candurin!

Installed EGR in channel window deflectors, completed the interior LED"S and today I installed the HID lights, OPT7 35W 5000K, crappy phone cam pics. Thanks Dan for your Youtube vid. It help a lot.

 

 

 

 

Well, against the wife's wishes I did just the "edge" emblem on the back. Did a quick and dirty 3 coats, turned out decent. I guess I'll leave it on until the wife notices

 

edge plasti 1.JPG

edge plasti 2.JPG

 

oops how did this get in here...hehe

titan.JPG

SoCal did you mask off the area around the edge badge and then peel it and cut it around the lettering. Looks really clean with no tearing.

This was scary. Grab it from one edge towards the rear and workit out. It will feel like you are going to break something. It will pop out and then you can remove it. It has the connector attached so don't yank away. You can then disconnect it and have the assembly away from the headlinliner. You will need to pop off the dome light cover. This is easier with a small screwdriver. Just work your way around and it will come apart. Then you can change the bulbs,festoon typeX3. I put in LED's and also did the cargo area one.

Looking great. Welcome!

You should be able to just peel it off.

What do you have available for the SEL 2013 EDGE with these LED's they may be able to be used as fogs???

Thanks.

Congrats on the new family whip! Dingo claims the K&N is loud! TINT THAT THANG!

Drove to lunch for our wedding anniversary! Went to a restaurant 25miles away instead of 5mile just so I could drive!!!

Tinting is on the mod list...along with wheels, though I may plastidip them and the grille like I've done the vdub. I had a CAI on the previous vehicle and that sweetened the rev sound from the stock squeal. The EDGE stock sound is ok compared to it. Looking at what is available for the EDGE, K&N 77 Series Metal Intake kit at $254, going to add the small things first

Gotta go slow to placate I want to drive her to next years anniversary

We bought it yesterday and I went and picked it up today. then drove to lunch, dropped off kid at movies, drove mama around for 1 1/2 hrs . Stopped off to take some pics then home...Ordered window deflectors and a K&N filter. I can't wait to go driving tomorrow!

This was a simple fix. There are two bolts holding the catch portion of the latch: loosen these bolts and raise the catch just a little bit. Tighten and test. Mine now closes with finger pressure. It didn't make sense to me that the hood had to be slammed to catch.

 

I'll take a pic tomorrow and show what the two bolts look like. This was a 2 minute adjustment.

Do you have those pics?

 

Thanks.

 

2013 SEL EDGE

 

Ordered a K&N filter, 33-2395 and EGR in channel matte black window deflectors.

Been browsing the mods section, oh so much to do

Traded in a 2009 Dodge Journey and the EDGE ride is great.

Took Mama out for a 45 mile roundabout drive and she loves it!

 

Be posting soon guys & gals.

 

Thanks!!!

 

test