steeler85048

I have a 2012 edge with 7600 miles. It is a salvage titled vehicle and as such has no warranty. I am having the slam into gear issue from a standing start and tranny making a growling noise when standing in gear with foot on brake. I am guessing it will need an entire tranny rebuild so i'm contemplating getting a used tranny or buying/having this one rebuilt.

Has anyone gone this route? And if so what was your labor cost for the install and or rebuild? Indepenent shop as opposed to dealer repair?

I have a quote of a rebuilt unit delivered to my house for 2200 and low mile used is about 1,000 on ebay.

Opinions?

Thanks,

Philip

OK, I now have the dreaded latch problem on my new (to me) 2012 Edge SEL. It only has 7600 miles but has a salvage title so I do not have the warranty. I will try the electrical parts cleaner when I get home today. I was reading your post...

give my method a shot. It's only 12$ in 2 cans. Mines prior to spraying was stuck 100% on the ajar light. Now its about 3 out of the 10 door close will not triggervthe ajar off. So spaying DOES do something.

Initially you said not to use the WD-40, just use electrical parts cleaner. Now you say to use the WD first. This makes me nervous so i'm leaning toward just using the electrical parts cleaner...

I have a new to me 2012 Edge with 7600 miles. It is doing the tranny slipping bit nearly every time I pull away from a stop sign. It will slip then slam into gear...

Hey Todd, are you in AZ and if so could you give me a shout out regarding where I can go to get this TSB done in Phoenix?