hawks05

also no sunroof.

Sorry, I'm in Texas and it seems to be more an issue when it rains.   Not sure where the different drains would be to check.  I know the AC one near the driverside feet.

My wifes 2008 Edge started leaking inside.  It is not antifreeze as there is no smell to it.  It started with leaking on the passenger side but now its getting to both sides.  Any idea where to start looking?

Wife claims she can hear sloshing of water.

Thanks in advance.

My wife's 2008 Ford Edge Limited is not blowing cold or hot air on the driver's side but is blowing air just fine on the passenger side and the back vents.  What could be the cause of this.  If its a blend door issue does someone have info on where it is and a part number for replacement?

Is there any write ups for replacing the accuator or at least checking it first and replacement? For both sides.

I want to make sure i have this straight. when both sides are set to HI in synced mode or independent, if an actuator is stuck it will tell the a/c compressor to run so that the driver side will blow cold air.

Here is the issue though. Both can be set to heat and the driver side still blows cold. so blend door doesnt sound right.

My wife's vehicle is a 2008 Ford Edge Limited. It has dual climate controls.

The issue we are having is not mater how hot you put the driver side it seems to still blow cold air. I have messed with it in the synced mode and the dual mode. The passenger side temp will change in either mode but the driver side will not. It also seems when you put the setting/settings in low the passenger side gets colder.

Thanks in advance for any help.

i know it to be possible and i know there used to be a patch kit/ retro kit to make it work. The issue i have is i cant find the part number for it to see if anymore exist.

Now i will say this before anyone goes off on use the search. I have tried to search the forum and have tried google. Either im not using the right wording or its not there anymore.

SO if you have a link to my answer please post it.

Thanks.

• Quote
• MultiQuote
• Edit

Welcome, hawks05, glad to have you join us! Any pics to share of your rides? Which one do you use for your DD?

My DD is the F150 and the wife's DD is the Edge. The Mustang is going through some tuning issues right now.

Name is Mike. I'm from the Houston area. Long time Ford owner. Have a 1999 Mustang GT with a fully built motor, a 2014 F150 SCrew 4X4 and a 2008 Ford Edge Limited.

Ok I replaced the brake booster no problem but now the pedal doesn't reach the brake light switch, how do I adjust this? It's a 2009 ford adage by the way.

I hate to beat a dead horse but I'm having the same issue with my wife's 2008 Ford Edge. I have searched everywhere with no answer. The two people on here this thread that have this issue have not seen an answer, at least on this thread.

There is about a 1/4in gap between the pedal and the brake switch.

How do I adjust this?