Jump to content

Tmcharest

Edge Member
  • Posts

    8
  • Joined

  • Last visited

Posts posted by Tmcharest

  1. My volume control button and the call hang up button on my steering wheel in my 2013 Edge used to work intermittently and then a few weeks ago they completely stopped working. Tonight, I took it the old one out and replaced it with a brand new OEM switch cluster. I put it all back together and the volume button and call hang up button still don't work. But the SYNC voice command button and everything else in the switch cluster work. Anyone have any ideas as to what it could be? Maybe bad wiring or a loose connection? I'm at a loss for what it could be. When it was all pulled apart all the wiring appeared to be fully intact. Any help or advice would be greatly appreciated!

  2. My volume control on my steering wheel in my 2013 Edge wasn't working, tonight I took it out and replaced it with a brand new one. I put it all back together and the volume switch still doesn't work. :/ anyone have any ideas as to what it could be? Maybe bad wiring or a loose connection?

  3. I need to replace the radio controls on the right side of the steering wheel in my 2013 Ford Edge SEL. However, I have been unable to find any videos on how to remove the airbag and gain access to the moulding to be able to replace the controls. Any help would be appreciated! Thanks!

  4. When I try to use voice commands and say "call John" it says "calling dot work" and calls the first contact in my contact list. Went on the ford site and it said to erase all emoticons from contact names, do a master reset and Then re-pair the phone. I have done all that 3 times and it's still doing the same thing. Anyone have any tips? I'm lost.

  5. Recently purchased a 2013 Ford Edge SEL. The volume control button on the steering wheel works intermittently. However the other controls on that side work perfectly without and issues. Could it be a bad connection on the volume part? Priced a new one at $32 so worse come to worse I can buy another one. Didn't know if anyone else has had this issue or any possible fixes! Thanks!

×
×
  • Create New...