mazda3ride
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by mazda3ride
-
-
I have 62k miles.
-
Hi Everyone,
I am hoping someone can help me diagnose this sound. It happens when I turn the wheel both going forward and in reverse. Sounds like a ticking noise that is bouncing.
-
How long of a time are we talking about exactly from startup to the time it drops to 600 rpms?
Not until the temperature is almost halfway between C&H. Whereas before, it would drop to 600 rpms just over C.
-
I was having hard shifting from 2-3 and from 6-5. I brought my 2015 Edge to the dealer and they said that there was a big update that needed to be done and they also cleared the adaptive tables. The vehicle now shifts smooth like butter when driving. I have noticed one thing however since the update and the clearing of the adaptive tables and that is the vehicle in now idling weird. So before I brought it into the dealer, it would idle at about 1K RPM's until the temperature was just over the C and then it would drop to about 600 RPM's. Now what it is doing is that it will stay at 1K RPM's until the temperature is almost at the halfway mark between C & H and then drop to 600 RPM's. If the RPM's remain at 1K, its shifts hard from P to D or P to R, The vehicle also feels like it wants to go once i take my foot off the brake.
-
Why couldn't you just run a thin bead of clear silicone over the joint of the access cover on the underside of the mirror?
I could, however seeing that this is a new vehicle, probably not the best way to go. Dealer has ordered me a new mirror.
-
Hello everyone. I am experiencing a whistle noise from from drive side mirror when windy. If I bring in the mirror assembly in a little the noise disappears. I did some research and found some other ford vehicles experienced the same issue. Anyone here having that issue?
-
Is there a clip missing or just not holding (needs new clips)?
I don't think the rubber is held on by clips. i checked the other side and didn't feel anything.
-
Hi Everyone. The rubber around the right rear wheel well on my 2015 Edge is loose. I am always having to push it back up but it really does not stay. Any ideas? I have read on other forums to use silicon. Not a fan of doing that. I have attached a pic for your viewing pleasure.
-
Brake Pads & Rotor Replacement Option for Edge Sport (2016-2018)
in Brakes, Chassis & Suspension
Posted · Edited by mazda3ride
Do the front brakes on a 2015 ford Edge have anti rattle clips that go on the bracket similar to the ones in picture below?