malammouri2015

I have a problem with A/C in driver side only where it blows hot air whatever temp I set.

Passenger side is workig fine. I did some search and found it could be blend door issue.

Is there anyway to do further checks / tests to confirm it is really blend door?

As it is hard to reach the blend door from driver side, is there anything can be done without removing the part ?

Thanks in advance

Thanks again Omar.

Great Stuff Omar. both ACM and DRL configurations worked using the standard ELM327 !!

Appreciate your help, maintenance shops would take fortunes to change these configuration.

What kind of configuration would require cable with switch ?

Is there any forum or website where I can read more on how to configure other parameters in the car ?

Thanks Again.

Thank you for your help guys.

@Omar, to change to the ACM asbuilt, Can I use the basic ELM327 or I need something supporting MS-CAN ?

Is there any reference showing how to change asbuilt files to change other parameters ? ( for Example , I need to change the DRL ( Daylight Running Light ) to OFF.

I have Ford Edge 2012 imported for USA to UAE. I have issue with Radio is that I cannot adjust to even number frequencies like 103.8 or 104.6 .. The only available frequencies are odd numbers like 103.7 or 103.9 ( 103.8 is not possible ).

I have another Ford edge but from UAE dealer and I can have even frequencies. Do I need to reprogram and component to be able to have even frequencies ?