Jump to content

edge_st

Edge Member
  • Posts

    28
  • Joined

  • Last visited

Posts posted by edge_st

  1. Hello Fellow Edge Owners! I have a few things for sale (mentioned below). Pickup is preffered in Phoenix area for Husky mats. Rest of the items I can ship via USPS priority mail. Paypal or Venmo or Zelle payment works for me. Please PM if you're interested. Thanks for looking!

     

    Husky All Weather Floor Mats (1st and 2nd row) - very good condition. Had on my car for just 6 months

    Drive Bright HID complete set by Drive Bright (included resistors and relay wires)

    Oil filter and drain plug for Sport model only

    IMG-4156_edited.jpg

    IMG-4158_edited.jpg

    IMG-4160_edited.jpg

  2. Hmm ... seals and gaskets ... continuing comedy of errors?

     

    The weird part is that the filter and the filter assembly are all hard plastic except for the three O rings thats seals them in place. All those were intact when I changed them. These pieces are definitely from somewhere else. Looks like broken pieces or a rubber gasket. Even has a part number ending in 'M' written on one of the pieces.

    • Like 1
  3. Yes, it was its first oil change. The yellow drain plug O ring was perfect. These bits and pieces were found at the bottom of the oil filter housing next to engine. I did clean it and put a new filter back with new O rings. I want to believe that these are just excess gasket material from somewhere. Hopefully wont have any affect on the engine longevity.

    • Like 3
  4. First, please move this post to the appropriate section if not posted correctly. I recently changed oil at 1000 miles on my new 2016 edge sport that has the 2.7 ecoboost. Overall, it was a fairly simply process. However, I discovered some torn pieces of rubber/silicone material stuck in the oil filter element and also at the bottom of the housing assembly. The old filter had 3 O-ring gaskets which I replaced with 3 new gaskets so they were intact and not torn. I don't know where these pieces could have come from. Infant little worried if something broke somewhere and bits and pieces were circulated with the oil. Would appreciate if someone can chime in!

     

    Pictures shows the gasket like material discovered. These are not plastic pieces from the filter assembly. They are softer rubber like pieces. I couldn't find any other gaskets at the bottom once I cleaned the housing. From my understanding there are only 3 gaskets that is supposed to be replaced and the filter cap itself doesn't have a gasket of its own? Would appreciate any help!

    post-47008-0-86340800-1506184868_thumb.jpg

    post-47008-0-88491100-1506184879_thumb.jpg

    post-47008-0-92795600-1506184892_thumb.jpg

    post-47008-0-67650800-1506184899_thumb.jpg

    • Like 2
  5. Happened to my sport as well (plus many more issues).

     

    They replaced the pannel under warranty. It was a combination of warping and adhesion failure.

     

    are those held down with clips and adhesive both? I am taking it to dealer this weekend. hopefully they will replace it. also the one touch fold down doesn't work on my car. it makes a sound but nothing happens.

  6. Hello everyone,

    I searched everywhere on this forum but didn't find a solution to my question. The left side roof trim on my 2016 sport is coming off from front. It causes quite a lot of wind noise as well. Are those held down by clips or double sided tape? From my initial inspection, it doesn't look like there are clips there!

    post-47008-0-79289800-1502297167_thumb.jpg

  7. Ford makes a set to fit the front on the Sport, not a perfect fit, but it will keep mud off the doors. However, there's nothing available, OEM or aftermarket, for the rears. Just too difficult a shape to match.

     

    There was a member here that posted the he had bought a rear set to fit a SEL (if I remember correctly) and had hand-trimmed them to the contour of his Sport. He never posted pictures however. I believe that that's your only option for rear mud flaps on a 2015+ Sport.

     

    thanks I ordered just the fronts for now. Will try to work with something for the back.

×
×
  • Create New...