I bought my 2013 edge used and it only had 1 remote start fob (GOH-PCMINI). I bought a second one off ebay but, I am having trouble getting it programmed. I followed these instructions from the person who sold it to me.
Here are programming instructions for this remote:
METHOD #11. Turn the ignition key to the ON position.2. Press and release the program push-button switch 3 times.3. Immediately turn the ignition key OFF.4. Hold the program push-button switch ON, then start the vehicle using the ignition key.5. When the unit senses the tach signal, the parking lights will begin to flash.6. Release the program push-button switch. The parking lights will turn on for 3 seconds to indicate that the tach signal is stored and the unit is now out of the program mode.METHOD #21. Turn the ignition to the on position.2. Press and release the programming switch 3 times.3. Press and hold, for 3 seconds, the button of the transmitter you wish to add until the parking light flashes, indicating the transmitter has been learned.
I also tried the method in this video: www.youtube.com/watch?v=eQ7HNE8eceM&t=3s
Nothing happens, I get not flashing parking lights.
Does anyone have advice on how to program my second fob?
Thanks.
