EdgeEh

Bit of an update. The seatbelt was working again the next morning and it continued to do so for few days. Then it happened again (both times parked outside, hot sunny weather). 

Luckily I had nothing to do that day, so I had it towed (Ford Roadside assistance) to my local dealership. The service manager ripped open the plastic cover, wiggled the seat belt and he fixed it. It is still getting replaced under warranty though. 

The driver side seat belt in my 2018 Edge is currently stuck in fully retracted position. It looks like the lock is engaged and I cannot pull it at all. I tried pulling gently, yanked it a bit, still nothing. 

Does anyone have any solution for this? My closest dealer is 4km away, so I may be able to just drive without seat belt there but I don't want to risk being pulled over for not wearing seat belt. 

On 3/28/2019 at 11:30 PM, Deltflash said:

Does any one know the Forscan code to disable the Auto Start Stop feature on a 2018 Edge.    Can't find it anywhere.  It appears it is 726-48-02 on a F150

 

Thanks

The 2018 Edge has no Auto start-stop feature.  

19 hours ago, Nick Halstead said:

thats an ENORMOUS amount of glare for oncoming traffic and zero focus on the high beam.

Appreciate the input. I have yet to test glare using another vehicle. From pedestrian point of view, the glare seems comparable to Acura/Honda Jewel headlight. 

I finally got around installing my XD HID kit - philips rebased 4300k for low beam and Philips XtremeUltinon Led for high on my 2018 Titanium. 

I must say I'm very impressed with the improvement over halogen, even SilverStar Ultras. The only thing is the colour doesn't really match. 

Some pic 25 ft away from wall

If you got the the H11B, you should be able to install it with the return wire pointing down. I have yet to install my xenondepot H11 kit, but from what I have researched, the Edge takes H11B. 

should be a clip inside the "hole"/cavity on the right side of the bulb housing. probably need a slim flatblade screwdriver to get it to unlatch. On some vehicles there are actually philips head screws holding in the assembly, but this looks like just a tabbed arrangement.

 

Not on an Edge but should be similar

Tabbed License Plate Lamp Assembly Example for Gen 2 Edge.jpg

Nice picture. I will give it a try and report back.

Thanks!

I'm trying to change the factory license plate bulb to an LED (saw a Sylvania 168 LED bulb on sale at a local shop), but I'm having trouble removing the cover. I could not find any guides online for the Gen 2 Edge. I don't want to pry it and end up breaking it.

I have uploaded an image of the bulb cover. Any help will be appreciated.

Recently owned a 2018 Titanium Edge (Canadian). I disliked the headlamp and upgraded to Sylvania Silverstar, to save some life of the low beam bulb I enabled the DRL control using FORScan.

I can confirm it's the same values as Fusion

1) BdyCM 726-16-02 - 0202 0202 024F (Disabled) to 0101 0101 0049 (Enabled)

2) IPC DRL set to Enable