07Bluesilver
-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by 07Bluesilver
-
-
Welcome! Nice ride!
-
Nice Ride ! Welcome!
-
Thanks I did check the harness with a bolt meter. It was a bad wire. I got one from another Edge that looks to be good. I will install it on Saturday. After all the new parts, it turned out to be the wire. Thanks for the info.
- 1
-
WELCOME!!! Like those rims, and the grill.
-
WELCOME!!
-
I have a code po010 on my Edge. I changed my VVT solenoid. camshaft sensor, fuel injector, spark plugs. I used to have a code po300 which I fixed, but then decided to put seafoam in my intake. Afterward the new code came up. That's when I changed my VVT and camshaft sensor also valve cover gaskets. When I took off the valve cover there was a lot of gunk all over. Now I'm doing an oil change and was thinking of doing a motor flush and see if I can get rid off the gunk. I'm not sure if to do the flush. Should I just do the oil change? To see if it helps and do another oil change within 1k miles. ANY INFO. WOULD BE GREATLY APPRECIATTED. THANKS!!!
-
WELCOME!!
-
WELCOME!!
- 1
-
WELCOME!!
-
Code po301
in 3.5L
new plug Motorcraft Platinum same that was on the Edge already. no oil or fuel on the electrodes neither. Moved new coil to it's position. I will order new injector and see. THANKS!
- 1
-
Code po301
in 3.5L
I'm getting a codepo301 on the Edge. I replaced Spark plug, o rings on injectors that was destroyed previous owner must had someone work on it and didn't do so a good job. Moved coil to cylinder 4. but still getting it on cylinder 1. Should I change the fuel injector next? Intake manifold and intake have no leaks, maf flow is good. I hope it's not the pcm! Any info would be appreciated. THANKS!
-
Code po301
in 3.5L
I'm getting a codepo301 on the Edge. I replaced Spark plug, o rings on injectors that was destroyed previous owner must had someone work on it and didn't do so a good job. Moved coil to cylinder 4. but still getting it on cylinder 1. Should I change the fuel injector next? Intake manifold and intake have no leaks, maf flow is good. I hope it's not the pcm! Any info would be appreciated. THANKS! Sorry if placed in wrong section it can be moved if need to.
-
His and Hers Edges
in Welcome Forum!
Posted
Welcome!!