TroyH

On 7/9/2019 at 3:57 PM, JAYQD said:

I believe I found where fuse taps were installed, which explains why I don't see any on the fuse panel.  I didn't follow the wires because the pavement was too hot to kneel on for long, but it would appear they were somehow installed near the OBDII module.  I'll have my dealership confirm the wiring is acceptable the next time I'm in for service.

On 11/7/2021 at 6:24 PM, Rysiu said:

thank you Gadgetjq, 

 

I looked up the fuses and fuse 35 is the 5 A Passenger airbag deactivation indicator and fuse  26 is the  30 A Front passenger door window and mirror. Front passenger door module. Front passenger lock indicator. Front passenger switch illumination.

 

I have not checked if it is always hot or not, as I am waiting for my micro fuse taps to arrive.

I just purchased a 2021 Edge Titanium and the under dash fuse panel is darned near impossible to get at.  There is a lot of stuff packed under there and I can maybe touch it with two fingers, neither of them the thumb.  This post got me to thinking that I could use the OBDI plug to get the switchable power.  If one of the connections is switchable, I'd easily sacrifice an old code reader to cut off the plug and wire into it.  Does that sound reasonable?  I'll research the plug in the time being to see what I can find.

Thank you for the video.  I'm a new owner of a 2021 Edge Titanium and started looking for everything.  The top fuse panel was easy to get to and I removed the layer to what I thought was the lower fuse box.  I didn't know it was upside down, opposite the upper.  I did fund a bunch of connectors with in line fuses down on the next layer. I'll look again for the actual lower fuses.

Now, slightly different topic.  Does anyone have a clue how to get at the under dash fuse panel?  I can see it but can only barely touch it with a couple fingertips.  Is there a path to it or something else that needs to be taken off to get access to it?  They built a pretty good wall around it.  I'm wanting to put in a dash cam but wasn't too scope out where things need to go veggie starting the installation.  I can start a new thread of it best.