Jump to content

TangerineDream

Edge Member
  • Posts

    6
  • Joined

  • Last visited

Posts posted by TangerineDream

  1. 20 hours ago, enigma-2 said:

    Based on what you previously said, (and I'm only thinking outloud), any possibly you unplugged the fuel pump? Only other thing I can think of in the rear that would prevent a start is the fuel.pump shut off switch may be unplugged (the one that triggers in an accident). 

    Fuel pump was the first thing I thought of - could not hear it pump with key on.

    After removing the access plate to to verify the electrical connection I pulled the fuel like - No Pressure !

    I used a credit on Amazon to buy a new one - reasoning that even if that was not the problem it was due to go after 150,000 miles - they don't last forever !

     I can hear it pumping now with the key on - still No Start .

  2. I have an OBD code reader - 'No Codes' 

     

    I reinstalled the 'yaw sensor' , the passenger side seat release actuator and grounded a loose wire.

    The car fired once then died again .

     

    Talked to a retired Ford Engineer this morning - he wasn't familiar with this system but he recommended replacing the lost parts & possibly having a dealership reflash (?) the CPU .

     

    I'd really like to bypass the whole mess - who's gonna steal an 07 Edge with 150K ???? - but right now I'll take what I can get !!! LOL !

  3. I know this post is ancient but - 

    I'm doing something very similar to my '07 Edge.

    I got the seat out easy enough but now the car won't start - spins/no start.

    I think I need to do something with the wires that were attached to the seatbelt retractor - ???

    What did you do with the wires - pictured - on your car ???

    Open Question !!!!

    If any body knows please chime in !!!!!!

    2016 Edge Rr St Delete - Copy.jpg

  4. -  to the point...

    I'm in the process of converting my 2007 Edge into a camper.

    I pulled out the rear seat in order to build a sleep platform with storage underneath.

    Now the car won't start !!!!!!!

    Motor turns over just fine fine but won't fire up.

    Going back to the last thing I did - there are 2 clips that I had to detach in order to remove the seat.

    I'm hoping I can 'jumper' the clips and it will solve my problem - on the other hand if that shorts out the computer I'm sunk ! LOL !!!!

    Any 'knowledgeable' advice out there ?????

    SAM_2911.JPG

    SAM_2908.JPG

×
×
  • Create New...