ferneyhough
-
Posts
66 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by ferneyhough
-
-
Just wondering if anybody could tell me the max size sync 3 supports in terms of Hard Drive capacity? I had a 500gb it worked no problem & just recently purchased a portable 5tb seagate but i can't seem to get it to work. I reformatted it to exfat from the factory ntsf. Any help will do & thank you to all in advance.
-
Ok thank you for all your info. I will post an update if & when I get one.
-
Can I go aftermarket or do I need OEM? If so do I just tap into the proper pin inputs in the harness at the apim? Thank you.
-
Just got sync 3 with nav installed in my 2011 edge sel which was factory nav. My question is my sync 3 is programmed for a reverse camera, when I reverse the screen turnes blue, how can I hook up a reverse camera. Thank you to all in advance.
-
Does Anybody know if there is a difference between the 2011-2014 edge interior door panels (skin). Looking to paint my door panels with some SEM paint/products. I was looking for a donor panel to try things out.
-
I have a 2011 edge sel & was wondering if anybody has ever dyed the interior panels i.e. door skins, front dash, A-B pillars. I want to dye the entire interior to match. I've seen some video's & read some reviews on some products from SEM & Dupont. Still up in the air on what to do. Any info on how to & what products were used would help.
-
Mine is the same Elotrain I have a 2011 sel edge, nice to know you are not alone
-
Sorry for the late relpy. The cost me $450 & they quoted my about another $100 to match the pillar. I upgraded the stock wireing through my hole truck to 14 gauge & I am going to be installing a Audison AV 5.1k & a Audison Quattro. Im going to go full active.
-
-
It can be replaced, I had my door skins off eariler in the week & poped mine off.
-
The RMS on the stock speaker is 25 watts if Im not mistaking & Im going to guess that the Polk speakers are @ least 50 watt rms, sounds like you need a more powerfull amp to move the speakers. My speakers for example sound better since I installed an amp to the factory oem system. Hope this helps
-
Ok Thank You TheWizard for your info
-
Thanks , I hope so too
-
Here is a PDF file for removing the steering wheel switch. Someone posted it a while back so I downloaded it & saved it, I would lke to thank that person but to be honest I could not remember for the life of me who posted it, but thank you. As for the other panels I have some pic's of the dash taken apart so it will give you a general idea on what you will be expecting.Hope this helps.
- 1
-
Yes it did come in & I was not impressed, for $65 bucks all I got was the front panel with no button fml , so the dealer tells me that for another $75 bucks he can order me the button, the only down fall is when you order certain parts like me you can not return them, there is no restocking fee, bummer. So looks like Im gonna have to think about it for a bit, but I wil get back to you with some info when I get it
-
Mine works no problem.
-
Just came across this on Ebay tonight, have a look if your looking to upgrade to an oem system. http://www.ebay.com/itm/2011-ford-Edge-screen-with-cd-changer-OEM-/151007424775?pt=Car_Audio_Video&hash=item2328be7107&vxp=mtr . I'm sure you will need more than this ie harnesses etc, but it's a good start.
-
the bugs are for example that I'm aware of and have seen some personally. Ground noises from the unit, sending no signal to one speaker or multiple speakers, fried circuit boards. They are also not the most user friendly piece out there. I have taken two of these out with bad ground noises and replaced them with the JBL and no ground noise. The JBL is also the most user friendly processor avaliable as of now. There were a few other bugs with the bitone as well, but they were less common.
The only reason I was asking was because it seems my bitone does not like the cold. The unit takes up to 10 mins to turn on in the -7 degree weather, other than that it does the job I need it to do.
-
I have the JL stealth box, I took out the W3 though and replaced it with a W6. I'm running it off their 900/5 amp. In my front doors I have the C5 component set and the C2 6x8 in the rear doors. I would pass on the bitone processor and go with JBL M-8 it is a much better unit and doesn't have the bugs that the bitone has. The 900/5 a,p was small enough to fit under the panel across from the factory sub location.
These "Bugs" your talking about in reference to the Audison Bit One can you tell me about them?
-
Ok thank you all for the info, I will keep you updated as soon as my part comes in
-
Looks like Im going to the dealer to order this panel with the buttons on them. probably run me around $100 but in the end I should get a liftgate to work or heated seats to work other than the touch screen I will keep you all posted as soon as I get the part in.
-
-
Is there anybody that could pop off their panel on there limited or sport model to help me out?
-
If you still whant to remove it let me know I can send you PDF showing how too.
AL
Anybody have a PDF file for the 2011 sel dashboard removal?
Add subwoofer to '19 edge st with BO sound system
in Audio, Backup, Navigation & SYNC
Posted
Maybe try something from Audison. They have all kinds of stuff for oem integration. https://www.audison.eu/product_lines/prima/