jtclark

The calibration threw an error... away from my notes but I think it was B115E. Not sure if I can fix it with FORScan but it looks like it maybe possible.

There's also a chance I have something else keeping the calibration from completing.

Right now I have fixed guidelines in reverse but no blocks.

I'll try to work on it a bit more tonight.

Sorry, I should have taken pictures, but it's externally identical.

The retaining bracket fit perfectly.

I just installed a F2GZ-19G490-A tonight (2016 model) on my 2011 Edge.

I paid $82 for mine from Levittown.

It looks identical and fired right up the first time it was supposed to where the old one was hit or miss.

I still need to recalibrate it tomorrow but the backup guides came on when I put the car in reverse.

So far so good...

Mine just recently developed this issue at 70K miles.

Service Bulletin No.: ASI-44308
Component(s): STEERING NHTSA ID Number: 10054565

Vehicle MakeModelModel Year(s)
FORDEDGE 2008-2013
LINCOLN MKX 2008-2013

Manufacturer: Ford Motor Company

SUMMARY:
FORD/LINCOLN: THE BANJO FITTING THAT IS ATTACHING PRESSURE HOSE TO STEERING GEAR IS EXPERIENCING A POWER STEERING FLUID LEAKAGE. MODEL 2008-2013 EDGE, MKX. *PE

3.6 is available for download.

They've gotten more of the new website up.

Looks like the update is getting closer.

The PDF recommends a Master Reset before installing.

I did not lose my Sirius presets.

And yes, it is 3.5.1.

Turn off Autoplay.

I had the Draw-Tite installed, Draw-Tite Hitch for Ford Edge Sport by America's Truck & Hitch in Canton, GA. They did a nice job with no cutting except for trimming two heat shields as per the Draw-Tite guide. Since it is at the bottom of the fascia it does hang a bit low but makes for a clean installation. I'll try to post some photos later.