JSR84

Like the title says.

Thanks

Is there any way to permanently disable this feature? I absolutely hate it! It goes off all the time for no reason. I hads a hard time distinguishing between a moving car and a parked car that only appears to be moving because I'm turning while backing up. You can disable it in Vehicle Setting but it enables itself when you turn the car on and off. Ridiculous.

Not a big fan of Angle eyes, but the workmanship looks stellar!

The bulb isn't seated correctly. The return wires should be other be oriented to the passenger's side of the bulb.

The bulb is seated correctly. I had the headlights out of the car and trimmed the tabs so that when seated and locked, the wire on the bulb is facing down as is the standard on HID installs. But regardless, when I had the wire facing the way it does if you don't trim modify everything the beam pattern is the same. I really thing its a problem with the projector. I swaped around the bulbs and ballast today and the problem remains on the right side. bummer.

I couldn't really get a great pictures of the brights. I even turned the exposure all the way down. But here it is.

I guess I don't really understand what you mean buy "Ones higher in the projector" They're both seated and oriented the same way. I'm not understanding how this could be.

Thanks for the help!

Buggers. Shouldn't have to pay for such a quick thing (literally 2 minutes right guys?)

 

Only Ford can do this. You cannot download any software to do this. It's integrated into Ford's internal service computer network. Ie. They plug your car in and it communicates with Ford and verifies your vehicle settings etc.

 

It sounds like it's officially called "IDS".

 

I have no problem fay for a service I asked for. One dealer told me if they could do it they would charge me the shop min of 100 dollars. So that I said "No Thanks"

Ok, I'll get a picture tonight.

One's higher in the projector. Turn on the high beams. You'll see.

Can you elaborate on this? I installed the bulbs while the headlights were off the Edge and I was able to orientate the bulb with the wire down. They both looked seated correctly. As mentioned in the OP I've had 2 sets of bulbs and ballists in and they both do the same thing. Thats why I'm thinking its a problem with the projector? I turn the high beams on tonight against a wall and the beam pattern looked as you would expect, the right projector still had that strange pattern.

HID retrofit on my Edge Sport. The 2 beam patterns look significantly different. I've modified the bulb so they can be inserted with the wire down (for the most part). I've used 2 different sets of bulbs. the actual light output from the 2 headlights look to be the same but the right looks more focused.

I have factory HID's and 3000k HID fogs in my MazdaSpeed 3. They don't put out a huge amount of light due to the housing design but they look great!

Finally found a decent service advisor, 10 min and 25 dollars later my DRL's are now my signal lights.

OMG The dealerships around here are awful! After a day of back and forward BS I was able to convince one of them but I had to make an appointment for a 5 min job! One of the service advisors told me "I can do it because of DOT rules" I asked him if he know what DOT meant and what country he was in.

If its a 2011 - 2013 then the high and low beam are the same builb, its a mechanical flap that controles the high beams.

Hey,

I bought my Edge used a little over a month ago and I had a question about the sunroof. I noticed that the sunshade will one touch open but I have to hold the button for the sunroof to open all the way. This sounds pretty ridiculous to me especially considering it takes about 10 seconds for it to open. Is this normal or is there something wrong

2013 Edge Sport.

What does the Edge use for DRL's? is it the headlights, running lights or LED light bars? The reason I ask is because I'm having some bad flickering when the DRL's are supposed to be on. The funny part is I'm running a relay kid and powering the HID's directly off the battery. The stock harness is just the switch source, there should be no reason for them to flicker even if the stock setup is reduced power headlight for DRL's.

I've determaned its a defective ballast. I've already made arrangments with the company to have it replaced.

I went out and had another look tonight and it would appear the left headlight is actualy puting out more light than the left.

Hey, I have a 2013 sport with the projectors and I just installed a set of HID's. But, it would seem that for some reason the driverside has a much more distinct eye in the middle of the beam. Has anyone noticed this on their edge before, or could it be an issue with the bulb?

Thanks

Jordie

Thanks for the heads up. I have to take it in to have MFT (or as I call it My Ford Punch on the account of me wanting to put my fist through it on my Focus lol) updated so I'll ask them then.

Hey,

I just picked up a 2013 Edge Sport AWD Candy Red. We traded in our 2012 Focus for the Edge because it was pretty small, especially with a kid. I picked this one up used, it's 10 months old with 20,000km on it. So far we love it, it looks great parked next to my Torch Red Speed3!

I have a quick question regarding the turn signal. It seams really stiff when activating, 9 times out of 10 when indicating right I'll flash the high beams. Lol is this normal or is something screwy?

Jordie