akdoggie

This is what I was saying with the =/- 2. The offset is very minor. 44 to 42 if I remember correctly. I can double-check but I'm certain I have the right numbers. I ran a salvage yard for a few years, so I have most of the wheel oddities for the Fords down. I currently have 4 different sets of Mustang wheels that I have used on my Fusion, Explorer and Mustang. Sold the Fusion and Exploder this winter, so now, these wheels will go on the Edge. The thing you have to worry about is how wide the wheels are. Some of the S197 Mustang wheels are 8.5 or even 9 inches wide. That width will play hell with the steering stops Sticking with the 7.5 and 8-inch wides cure that problem.

I realize that this thread is 6-7 months old, but since I'm fairly new here, I wanted to throw out some more info. I bought an 08 Edge recently and this summer these Mustang wheels will be going on it with the correct sized tires. (Shown with 245/45/19's). S197 Mustangs thru the model run of 2014, all use the same 70.5/6 mm center bore and are within =/- 2 of the stock Edge wheels. Same with the earlier Exploders/Mountaineers of the 02 up models. All have the same centering hub dimensions and 5x114.3 wheel bolt patterns. The Flex again, the same centering and w/b pattern. There are only a couple of the 02 up Ford models that do not have the 70mm bore. Those have 63mm centers and will not fit.