Jump to content

strike2tamu

Edge Member
  • Posts

    15
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by strike2tamu

  1. Here is how I removed the front emblem on my wifes 2011 Ford Edge SEL.

     

    First remove the (2) 10mm screws and 4 clips located on the top of the shroud. Marked with red circles are the things that need to be removed.

    post-30024-0-23182000-1400021213_thumb.jpgpost-30024-0-28428300-1400021215_thumb.jpg

     

    Then gently pull back the shroud in the direction of the yellow arrows, do not go to far, just enough to get you hand in the hole in the center.

    post-30024-0-78342600-1400021286_thumb.jpg

     

    You are reaching in and unclipping the three points on the trim piece that actually holds the emblem in place. They are circled in red in the picture below. (You can probay just use a 10mm socket and take the two nuts of the emblem, I didnt try this because it was much easier to just push the tabs down and unclip it)

    post-30024-0-29704200-1400021402_thumb.jpg

     

    After you have removed the emblem and trim (if thats the way you did it) you simply unbolt the emblem from the trim using a 10mm socket.

     

    The rest I am sure you can figure out, to replace just reverse the order of course. Pics below.

     

    post-30024-0-48093500-1400021596_thumb.jpg

    post-30024-0-50920400-1400021598_thumb.jpg

    post-30024-0-95314500-1400021601_thumb.jpg

  2.  

    It's the opposite, it's good planning from Ford to make sure they get the most money possible.

     

    If 20% of the people pay $800 for the factory navigation or 80% of the people pay $200 for a nav card from the dealer, which one makes Ford more money?

    Seems like they could make more on after sale activations though, instead of letting the system that is perfectly capable go to waste like having an HD tv and watching SD channels.

  3. The Nav software checks a flag that says whether it's supposed to be installed or not. There is no getting around it. Dealers can't change the flag. Even factory workers can't change it. Only a few engineers at Ford have the software to change it.

     

    Just buy a TomTom or use your phone.

    Seems like really bad planning and a missed oppurtunity for money which is odd for a dealership.

  4. 2011 Edge SEL, Sync is having issues, sync site says its up to day...Gen2 V1.8 shows as the latest update back in august of 2010, is this the latest update for my vehicle? I have put an image on a usb and successfully transferred it to sync, have saved it as the wallpaper, but it will only show up on the first wallpaper option, will not sure on the

     

     

    Hi strike2tamu,

     

    Version 1.8 is the original software for MyFord Touch; there have been 10 updates and 1 upgrade since then. :) To receive the latest software (v3.6.2) you'll have to visit your dealership. As for your wallpaper, the diminsions may not be set to the correct size, make sure they are as follows:

     

    • Compatible file formats are as follows: .jpg, .gif, .png, .bmp

    • Each file must be 1.5 MB or less.

    • Recommended dimensions: 799 x 378

     

    Let me know if you have any questions.

     

    Rebecca

    Thank you for the response, this was a vehicle purchased used, not from a ford dealer, is there a charge for this update?

  5. If you can figure out how to remove them without breaking I have a 2011 limited with wood trim we can swap.... Email me directly @nickturri86@gmail. I still need to figure out how to remove

    I will definitely let you know if I can figure it out.

  6. 2011 Edge SEL, Sync is having issues, sync site says its up to day...Gen2 V1.8 shows as the latest update back in august of 2010, is this the latest update for my vehicle? I have put an image on a usb and successfully transferred it to sync, have saved it as the wallpaper, but it will only show up on the first wallpaper option, will not sure on the other 2 modes, any ideas?

  7. I have a 2011 SEL and would like to switch out the silver plastic dash trim pieces to the wood that comes with the limited, any ideas on where (besides a junkyard) I could find this item (maybe even the part numbers) and how to remove the old ones? Any help is great appreciated.

    • Like 1
×
×
  • Create New...