cmurra6745

pics of the primed grill in black edge anywhere?\

did you remove the pieces to do this ?!?

I got that non slip rubberized pad with raised edges hold it perfectly

this one

I have led's in my 05 edge with halogen projectors. brighter but night as wide spread a beam as hid's. you do not need to retro fit new projectors.. bs ..

the sony system is not great .. id rather more bass

hmm 250 for a box.. i have a 10" jl sub but 250 for a box is a bot steep let me know if you lower it

those look nice, i would def be intrested to see what works with the current system , i have a limited so mine is shiny and id rather have a non shiny version ..

nope tried the novus kit as well, made not one bit of difference

yes its pretty bad , unfortunetly it was pre owned so i dont think the previous owner gaf, that being said i always use a lubricating wax spray like ultimate quick detailer on it and a soft mocrofiber, and i have tried revoing them with the likes of plast-x and such with no results, i even wore thru and edge to where it shows white so it seemes that the black coating is only that, a coating ... i will think harder and find a solution though

Ask nick halstead when he gets back from training too. He did similar to what red bow did. Only his is trained in red. You can look at his page I think he has a few pics of finished interior. https://scontent-lax3-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/10273964_10206925347065575_2699573500343580386_n.jpg?oh=0e76cd4fa41480f8bb30be300bd247b9&oe=5720EFEB

yes but see where his hvac controls are raised buttons? mine are flat touch panel buttons so i would have to either cover them and not use them or cut them out around the holes ect i will post a pic for what i mean if i can

yea i wouldnt mind a dash kit but with the touch panel climate controls y have to reach into the hole to tuen the things on /off... i kind of want it flat like it is now..

no.. no dash kits.. they are raised up and in extreme heat fall off .. they are only 3 m adhesive .. and leave gaps.. just dotn look good i want something that will look stock .. maybe i can find a good painter

yea but my issue is i need to wrap around the touch hvac controls to still make them functional

hey all, i have an issue . I have a 2014 Limited with piano black in the center dash. now we all know piano black sucks, its shiny scratches easy eact. my question is what can i do to cover this without using a dash kit , the HVAC control is touch sensitive so i need to keep those open and accessed , i was thinking a silver 3m wrap but wouldnt know where to start looking and asking about it but i need this area covered.. think is the lower part with the shifter ect would look weird because the gear selector would need to be totally uncovered and its black, so maybe a black wrap > i was thinking about painting but that would cover those areas i need to press unless i had a really good painter

ahhh i just dont know what to do i want to cover it but have the functionality remain .. any suggestions

hey every one so i have a 2014 limited that i bought with 16k on it.. at the time didnt really pay attention to mpg just enjoed driving it!

now that i look though i do a lot of stop and go city driving mixed with ocasional country driving and some highway , now i have 22 k and my lifetime avg which i rest when i got it by resetting trip 2 is 15.4 mpg... and the live mpg usually reads 13-16 mpg whith tank fill ups being 13.5 to 14 mpg babying it, wtf is going on !! i mean 16 or 17 mpg i would be like ok, is it the red lights killing me or the short trips?

 

This is what it looks like

 

 

 

Please let me know if this looks correct

 

-Benny

Yes!! thank you so much !

 

 

Hello,

 

This item can be found here https://levittownfordsupercenter.com/oemparts/BT4Z-19893-AC

 

We do offer free shipping but have a minimum of 99.00

 

Please let me know if you have any questions.

 

-Benny

 

 

hey benny that pic of the ac vent shows one piece can you confirm it is 2 seperate vents for right and left side aiming.. i understand its a one unit with two diffrent vents such as is stock already is that correct

hey guys!!

im looking for the replaement to the center ac vent above the my ford touch radio for a 2014 ford edge limited any idea on the part number and the cost with the discount??

vin #

2FMDK4KCXEBA41926

anyone !?!?!?

2FMDK4KCXEBA41926

ok ill grab it today and post it up

i have a 2014 ford edge limited with my ford touch ect. i need the whole paino black center concole including the touch climate control panel and the lower panel can you either help me with this part or with a part # please!!!

I need 2014 edge headlight dust caps .. pricing please with shipping :-)

I need 2014 edge headlight dust caps .. pricing please with shipping :-)