Jump to content

pwgsx

Edge Member
  • Posts

    9
  • Joined

  • Last visited

About pwgsx

pwgsx's Achievements

Newbie

Newbie (1/14)

  1. 2013 Ford Edge- This problem started a month ago, I went to gas up the wife's car and when I went to restart it, it would crank but not fire. I tried a few more times and finally it started. The idle was all over the place but after getting it on the road, it was fine. I checked a bunch of things at home and found nothing. The next week I gas it up again and upon starting it, although it felt like it was sluggish it started and was ok. The idle was a little up and down but ran fine. My wife got a check engine light last week but when she got home it was off and it showed no stored codes on my reader. I filled it up again but on purpose I didnt fill it 100%. The car started fine and idled fine. So now I really puzzled and last night I went to fill it up 100%. I went to start it and again, it didnt want to start. The motor cranks, I have power but it doesnt fire. More cranking got it running and as I got home it showed no signs of any issue. I am convinced its something fuel related . This has been at all different gas stations so its not the gas. HELP !!!
  2. Fixed, it was the blend door. Thanks for the help
  3. Thanks for the pdf, it will make life much easier.
  4. The more im reading thats what it seems.....any idea how to get to it or is there more than 1 ?
  5. My wife has a 2013 Edge SEL, this morning I went to get her gas and turned on the window defrost. Only the Driver side was getting heat. Duel temp was selected and both sides set at 80. I messed with it for a bit but I am only getting hot air from the vents, dash and floor on the driver side. Passenger side is blowing cold air. Is there a sensor that might be bad or maybe the blend door? HELP !!!
  6. So I ended up sending the evo back after having no luck getting it to program myself. I also had a locksmith make a new key directly from the car with their laptop as tech support said maybe both my keys were identical copies of each other. Still didnt work.........FF to a few weeks ago when I brought my car to a custom car install shop. He installed a "unknown unit" in the car, and he cannot get his unit to program. As soon as he installs the 2nd key the unit acts like there is no new key in the ignition and wont program. I left totally pissed off.....I began calling Ford dealers around the area and 2 had no clue what I was talking about and said there is nothing to "unlock" in the computer system in the car. The other dealer wanted $250 to hook up but claimed he really didnt know he could unlock anything as far as key programming. In my last effort, I asked my friend who works for Honda if he had any contacts to a Ford dealer. He called around and he basically got the same info- there is nothing to "unlock in the ford system" and they never encountered this issue before. Help before I pull all my hair out !!!!
  7. Well I connected the t harness and can h and l but the keys wont program. I tried a few times, even watching this video I found on you tube and no luck. I dont get what is going on with this dam thing.
  8. I contacted them and they were sorta helpful. He said I need to tap into the driver door pin wire- but the diagram shows to cut this wire. He said to also connect the rest of the wires on the T harness to the 20 pin wires. I also re flashed the unit to the most recent update but not its asking if the Edge comes with a factory alarm?
  9. Has anyone installed one of these units on a Ford Edge? https://fortin.ca/ I am only going to use it for the remote start feature. I found it while looking online to add remote start to my wife's car using the factory key fob. It seemed simple enough but it just arrived today and I am over my head I think. Yes the T harness part looks easy but nowhere does the guy show where these other random wires go coming off the harness. They are just bundled up but clearly some are hooked up. He then mentions tapping into the Can H and Can L but then the video just skips over that. HELP https://www.youtube.com/watch?v=I3csMxsq-S0
×
×
  • Create New...