Jump to content

wayneo

Edge Member
  • Posts

    17
  • Joined

  • Last visited

Everything posted by wayneo

  1. i changed my oil i did reset the oil life but when i start the car it says "change engine soon" i press ok it goes away but always comes back
  2. when i start my car or when i turn it off a display comes up that says something like " battery saver system is turned off, turn ignition off or start engine" any idea why this is coming up?
  3. i have a 2013 ford edge limited i need a new rim and the chrome "hub cap" i am not sure if it would all be 1 piece or if they are separate. any ideas where to get 1 from thanks
  4. sometimes when i make a left turn or stop straight at a red light my brakes pulsate a little never when i make a right turn almost like the ABS is engaging any thoughts?
  5. wayneo

    bent rim

    i have a 2013 ford edge limited i need a new rim and the chrome "hub cap" i am not sure if it would all be 1 piece or if they are separate. any ideas where to get 1 from thanks
  6. its a crazy thing the driver side is blowing hot air and the passenger side is blowing cold air. yes i do have the settings correct.any idea what could be the problem
  7. turns out it was a bad fuel injector and all the plugs were " shot"
  8. my 2013 edge limited was running fine... yesterday i went to start it , and it was running rough and then the check engine light came on, i hooked it up to the "fixed" app and it says the cylinder # 6 is miss firing any ideas what it could be
  9. yea looks like i am going to have to look for any corrosion on the camera connection, and if nothing is found , replace the camera
  10. well i just got the car in June so i really don't have anything saved do you think a master reset will resolve the problem?
  11. Enigma thanks for the advise put that did not work, i thought that i read on here to try a master reset. do you think i should try this? what will this reset?
  12. Do you know how i would access the camera to check for corrosion around the ground wire pin?
  13. when the camera was working there were no calibrating lines if i install a new camera is there software that need to be installed also?
  14. I bought a used 2013 edge in June, the dealer told me that the back up camera doesn't work and that it would cost $600 to fix it and he wasn't going to put that kind of money into the car, well Monday the camera started working, then yesterday stopped again, any ideas what could be wrong. the screen says to contact my dealer
×
×
  • Create New...