omaedge

For anyone else that has this same question, I found a great guide for the pin moves on a Mustang forum. Per my research, all the pin changes should be the same, unless you do not have dual climate. Then you need to wire the passenger climate wires to the driver pins to make the bezel work properly. Other than that, looks very manageable. I'll add a link if forum rules allow.

Hi there, has anyone added OEM heated seats to a second gen Edge? I am upgrading the 4" screen to an 8" screen and so will have the heated seat buttons on the new radio/AC bezel, and noticed that there's a nice set of heated seats at the local parts recycler. I'd like to snag them and wire them in to the radio bezel, but haven't found that particular mod anywhere else in the forum (I see lots of aftermarket additions, but not OEM seats). Could anyone share the relevant wiring diagrams or point me towards another resource? Edit: Just realized my original question was about a "second gen Fusion" and not a "second gen Edge." Hoping that a current Edge owner can help!

Hi everyone, I'm looking for resources on upgrading the 4.2" screen to an 8" screen in my 2017 Ford Edge SE. I'm familiar with sourcing the proper screen/APIM, upgrading the USB hub, adding the GPS antenna, and sourcing an FCIM with 8" cutout, but I'm wondering if anyone else has undertaken this and if any connector pins need to be rewired. 4D Tech sells a conversion pigtail, but I'm looking to avoid the $300 expenditure if it's been documented elsewhere how to do the conversion. Could anyone point me towards resources they used to do the conversion? If there are 2nd gen Edge examples, that would be extra helpful. Thanks!