igna

ok, thank you!

Do you refer to the VIN that appears on the right, at the bottom of the dashboard, if you are looking from outside standing in front of the car? 

Is that stamped on the chassis? Thanks!

I've just found that this is a Federal Mandate to help law enforcement ID a stolen, wrecked, burnt or otherwise unidentifiable vehicle.

So the VIN must be stamped somewhere in the chassis or frame of my Ford Edge...

Thanks for the links, but what I need is the VIN stamped somewhere in the chassis. 

I'm not referring neither to the VIN that appears on the windshield nor to the one on the driver's door sticker.

It is supposed to be engraved somewhere on the body/frame/chassis, right? Or in the US that's not required by regulations?

Thanks again!

Hello, first of all I would like to know if US regulations requires to stamp the VIN number on the chassis/frame/body. If so, does anyone know where can I find it in the Ford Edge 2010?

Thanks! 

3 hours ago, 1004ron said:

So where can it be found on this engine?

I couldn't find it, the dealer gave me that number

4 hours ago, omar302 said:

 

How did you install it and wire it?

They couldn't find any other way than this, not a nice solution, but enough to pass the inspection. I can remove it later.

Yes, that's the only modification, the rear fogl lamp. In Spain is enough with only one.

19 hours ago, 1004ron said:

Some countries check the engine number stamped on the block to verify that its the original, not a replacement, and not listed as stolen - I'm guessing this what the igna needs is for.

Correct, that's what they were asking about, an engine number stamped somewhere in the engine. Thanks!

20 hours ago, niceonept said:

 

Have you shipped your Edge from North America to Spain? That's interesting. I guess it wasn't too expensive then?

The model you have, the SEL and it's engine are not available on any of the European Edges over here- they are all diesels.

It'll be interesting to see how you get on and whether you have any problems getting spares and having the car serviced.

The shipment cost was around $1,000. The issue is the burocracy in Spain, a lot of paperwork, several fees... But it is worth since the car was almost new.

I finally got the engine number from the dealer. Thanks everybody for your help!

21 hours ago, WWWPerfA_ZN0W said:

@igna

Engine Identification

For quick identification, refer to the safety certification decal.

• The decal is located on the LH front door lock face panel.

 

Engine Code Information Label

The engine code information label, located on the front side of the valve cover, contains the following:

Item	Description
1	Engine part number
2	Engine plant (Cleveland)
3	Engine displacement
4	Engine configuration
5	Twin independent Variable Camshaft Timing (VCT)
6	Bar code
7	Bar code
8	Running number
9	Engine build date (DDMMYY)
10	Plant shift line
11	Derivative code

Thanks!

Thanks so much!

Thank you!

Thanks, I will try to find it there.

Hi, I need to register my car in Spain, my country. In order to do it they ask me for a lot of tech data. One of the things they ask is the engine code. I'm not sure if US cars have a code printed on their engines. I'm confused. I've been talking with Ford US and they are going to mail me a tech sheet with a lot of information, but they guy didn't know about that "engine code", maybe the US cars don't have a code or serial for the engine? I'm confused.

I looked online for it and says:

Hi akirby, what I need is the engine code, it should a combination of numbers or letters, I'm not sure. I don´t know where can I find it. Thanks!

Hello, I have a 2019 Ford Edge SEL Ecoboost. Where can I find the engine number/code? I have the VIN, but can't find the engine's code. Thanks in advance!

Hello, I have a 2019 Ford Edge SEL 2.0L. When do you recommend me to do the oil change? 7,500 or 10,000 miles? ForPass app is saying me to do it now at 6,000 miles. Thanks very much for any advice!