fransua

Hi there again , I tried the voltage on the fuse and no voltage at all . I have not put the analyzer yet waiting for the check engine to light up. Last time I used it gave mi no codes at all. Does the fuse suppose to have voltage once I turn it on I think it should. And I did check fluid and flowter. I’m 60 years old and I have a good background with mechanics I built my first car from ground up at 16 years of age. But I am somewhat lost with so much electronics on newer cars. Thanks for help ahead.

Hi there to all. I was working with my edge today and I found out a couple of things. I lent it for about a couple of weeks to my daughter. When it came back I noticed a red break warning on the right too plus all the warning lights. The edge is running perfect with no problem at all. I tried to reset doing all kinds of recomendaciones inclusive jumping the negative and positive desconected of course. Well I noticed then I had no fuse in the abs well put it in and reset again and nothing. As I turned the key all will go on immediately inclusive red sguare on right. I believe somebody when I lent the edge took it out. My question is as I put the switch on am I suppose to have 12v or any voltage on fuse connections I have not tried yet. Il try tomorrow.

In my case every warning lights up at al moment I disconet battery for a couple of minutes put it back and all is ok first 10 or 15 minutes then they lite up again , every warning light

I have a 2013 edge sel and having the same problem warning lights all of them lit up. Any help would be appreciated. Drives great but I hate those lights on. Ran diagnostic and all is ok. Please let me know if you find something out! Thanks

Every darn warning light would light up, sometimes more or less . But she is working fine . A couple of times has shut off like if gas is cut off. Otherwise drives wonderfully. I hate to drive around with all those lights on! Put new battery in and work fine for a hour or two! Please any info would appreciate thanks ahead