Wesow

Gents,  

Looking in SECM Module for Engine Tune Selection page I could not find the Engine fitted in my car Edge ST-Line 2018 2.0L Diesel 210 HBP. Which one I should select?

Gents..this is a great news , I would like to get ACC in my car, where I could get the ACC switch in UK? and how do I know if it will work on my car

Gents.. Appreciate your help How do I delete admin Key?

I have programmed an admin key in addition to the two keys I have as this key has 4 buttons for remote start then I found out it has the wrong FCCID code number, I would like to delete it from the menu, How can I do that?

13 hours ago, Wesow said:

Thank for the info, I will add details of my car to signature as suggested,  my Edge is 2017 ST Line Turbo Diesel (UK version)

Unfortunately  It did not work, I still have issue with two line(DDM) 740-03-1 and (PDM) 741-03-1 reading F while while instruction in table above said to change 6 to 7.

5 hours ago, omar302 said:

 

Just as @Wesow stated above, it is better to add you Edge model/year to you signature. I assume you have a European Edge as from you screenshot it shows to be a diesel model. The default value is different (not 7) because you also have folding mirrors. So you have 720-02-01 as FBA4  AC78 1E08 and you'll need to change the A to E (A+4 = E). The line then becomes FBA4  EC78 1E08. When writing the value you will get a "checksum" error, just ignore it, then the last two digit (08) will change to the correct checksum value.

Thank for the info, I will add details of my car to signature as suggested,  my Edge is 2017 ST Line Turbo Diesel (UK version)

13 hours ago, omar302 said:

 

	Enable Reverse Side Mirror Tilt:
	720-02-01 (2013+ MY)	xxxx Xxxx xxxx
	(IPC)	3 (Disabled - Default)
		7 (Enabled)	Add Hex 4 to Existing Value: 3+4=7
	740-03-01 (2013+ MY)	Xxxx xx
	(DDM)	6 (Disabled - Default)
		7 (Enabled)
	740-13-01 (2013+ MY)	XXxx
	(DDM)	00 (Disabled - Default)
		FC (Enabled)
	741-03-01 (2013+ MY)	Xxxx xx
	(PDM)	6 (Disabled - Default)
		7 (Enabled)
	741-13-01 (2013+ MY)	XXxx
	(PDM)	00 (Disabled - Default)
		FC (Enabled)

 

Select left/right mirror, put vehicle in Reverse and mirror will automatically tilt down toward curb and then return to normal position when gear is changed or mirror switch is unselected.

 

Reverse Tilt Mirror Calibration:
1) Switch the ignition on
2) Press the memory button
3) Select the mirror you want to adjust
4) Put your vehicle into reverse (R) and let the mirror automatically tilt until it stops
5) When the mirror is in its tilted position and is no longer moving, adjust it with the controls
6) Hold the memory button for 5 seconds to save the setting
7) Press the mirror button and return to park (P)
? Hold memory button again

 

Although there is no specific list/sheet for the For Edge, you can generally follow the same codes as other Ford vehicles. For the 2015+ Edge, you can follow the 2015-2020 F-150, 2013+ Fusion (2nd Gen) or 2016-2019 Explorer.

Thanks for your help, As my knowledge of forscan is almost 1 day old I appreciate your support and excuse my lack of understanding. ... I did not figure out which digit I need to  change the Line   720-02-01 has FBA4  AC78 1E08, your charts say 3 disable and  7 enable , next Column says : Add Hex 4 to Existing Value: 3+4=7. But there is no 3 in all line. attached screen shot.

On 2/22/2018 at 7:44 PM, Nois3 said:

So I didn't get to go through the whole thread but I might be able to answer some questions and help out with the Forscan mods on the Edge. I got 2016 Sport 400A package. So far I did the following:

Disable DRLs (for HIDs to work)

Reverse mirror tilt

Global window close (Open was enabled from factory)

Disabled hyperflash (for my front LED turn signals)

Disabled front lamp outage (for HIDs to work)

Enabled secure idle (lock the shifter when fob is not in car while car is running)

Disabled double horn honk

Enabled heated SW and seats buttons on home screen on Sync

Enabled climate section on right cluster screen

Added fuel history display

Added hill start assist (haven't tested it yet)

 

Now here is my to do list that I am trying to figure out. If anyone has any ideas please let me know:

- Disable stability control (AdvanceTrac) for some fun in the snow

- Enable Auto hold (for the car to auto hold the brakes on a long traffic light)

- Disable "Language Set To English" prompt on every start when I enable the View Text Msgs/Nav Keyboard while in motion

 

If anyone wants the codes for the mods i've done, let me know.

Could you let me know Reverse mirror tilt code please.