maddog0963

Just for information I found this forum trying to add air bags to my 2014 Edge the bump stop is held to the frame by a T47 torx, I had to grind the outside of my 3/8 drive socket down to get it up in there, it does not just turn off.

So my brake booster had went bad on my 2014 Ford Edge after getting everything back together and bleeding the brakes manually, I don't have a pressure bleeder, also I purchased a code reader about a year ago when I replaced the ABS but it keeps telling me that my vehicle does not support the ABS bleed function, well now the pressure is not releasing from my rear wheels. I can drive it and feel the rear brakes dragging as I continue to drive and eventually it will throw a C0044-28-AB code and light up my Advance trac system lights. I can make everything go away by opening either rear bleeder valve and when I do it's like someone has their foot on the pedal it will almost squirt up to the fender well. I can monitor my ABS system with this code reader and after pumping the brakes up I'm still holding 29 PSI in the system when I remove my foot from the pedal. I had to come back and edit this, when I rep[laced the ABS even though I couldn't get the ABS bleed to work I did get a decent pedal after bleeding it wasn't 100% but I could give it a second pump and be good, when I bled the brakes then I did not have the parking brake on...I did however have the parking brake on this time....could that have caused my issue?

How do I fix this? One note of mention in order to get the booster out I did have to remove the lines on the side of the ABS to clear the booster....should I unhook the battery for a while then rebleed everything?